Configuration Elastix

[khouloud]

Bonjour,
Je viens d'installer une carte Dialogic Diva Analog V4 sur Elastix,
Aprés sa configuration, j'ai tapé :

[root@localhost divas]# ./Start
Start system watchdog ... OK, running
Update CFGLib information ... succeeded
Start adapter Nr:1 - 'Dialogic Diva Analog-4 PCI v1', SN: 3194 ... OK (already active)

Successfully updated configuration of Diva drivers
Successfully updated configuration of Dialogic Diva Analog-4 PCI v1 SN:3194
Successfully updated configuration of Diva TTY driver
Successfully updated configuration of Diva CAPI driver

[root@localhost asterisk]# lspci
0a:03.0 Network controller: Dialogic Corporation Analog-4 (rev 01)

Ensuite j'ai testé capi j'ai obtenu:

[root@localhost asterisk]# capiinfo
Number of Controllers : 1
Controller 1:
Manufacturer: Eicon Networks
CAPI Version: 2.0
Manufacturer Version: 2.0
Serial Number: 3194
BChannels: 4
Global Options: 0x000003f9
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x000003d3
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
T.30 modem for fax group 3
56 kbit/s bit-transparent operation
Modem with all negotiations
Modem asyncronous operation with start/stop byte framing
Modem syncronous operation with HDLC framing
B2 protocols support: 0x00001fdf
ISO 7776 (X.75 SLP)
Transparent
SDLC
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
Transparent (ignoring framing errors of B1 protocol)
Modem error correction and compression (V.42bis or MNP5)
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 asyncronous mode with V.42bis compression
V.120 bit-transparent mode
LAPD with Q.921 including free SAPI selection
B3 protocols support: 0x000000bf
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
T.30 for fax group 3 with extensions
Modem

0100
0400
f9030000
d3030000
df1f0000
bf000000
b3010000 28446ac0 d2840000 28446ac0 b3010000 28446ac0
ff010000 00000000 00000000 00000000 00000000
FAC REQ - Illegal application number (0x1101)

Mais Elastix n'a pas pu détecter ma carte , là ou je bloque , lorsque je sélectionne "Detect New Hardware" j'obtiens "Found no card. Please be sure to load card drivers".
Si vous avez une réponse c'est avec plaisir que j'attends vos commentaires
Merci