PDA

Voir la version complète : RE: Configurer Patton SN-DTA Single/Dual-Port ISDN



martro
22/07/2014, 12h05
Bonjour,
j'avais ouvert une discussion dans "Emplois et demandes de prestations" Je cherche une personne pour mettre en place et configurer Patton SN-DTA Single/Dual-Port ISDN. j'ai trouvé le problème du ISDN il fallait un câble croisé ! Maintenant j'ai la LED allumée.
j'ai utilisé ce tuto (https://www.ordinoscope.net/index.php/Informatique/Hardware/T%C3%A9l%C3%A9phones_et_ATAs/Patton/SmartNode_4630/Passerelle_simple_VOIP-SIP):
pour configurer mon patton. Ce que j'ai compris on utilise le patton comme routeur. l'appel sur l'ISDN est redirigé vers Asterisk qui lui, répond à l'appel.
Quand je teste avec un appel, je n'ai aucun log sur le serveur Asterisk (traces IP) ?
Voici la config du patton et les logs de debug du patton:

# SN-DTA/1BIS2V
# R6.5 2014-03-05 H323 SIP
# 2014-07-21T18:20:35
# SN/00A0BA06ED4A
# Generated configuration file

cli version 3.20
clock local default-offset +00:00
timer PROVISIONING now + 3 minutes "provisioning execute PF_PROVISIONING_CONFIG"
dns-client server 8.8.8.8
dns-client server 8.8.4.4
webserver port 80 language en
sntp-client
sntp-client server primary pool.ntp.org port 123 version 4

system

ic voice 0
low-bitrate-codec g729

system
clock-source 1 bri 0 0

profile ppp default

profile tone-set default

profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20

profile pstn default

profile sip default
no autonomous-transitioning

profile aaa default
method 1 local
method 2 none

profile provisioning PF_PROVISIONING_CONFIG
destination configuration
location 1 http://redirect.patton.com/$(system.mac);mac=$(system.mac);serial=$(system.se rial);hwMajor=$(system.hw.major);hwMinor=$(system. hw.minor);swMajor=$(system.sw.major);swMinor=$(sys tem.sw.minor);swDate=$(system.sw.date);productName =$(system.product.name);cliMajor=$(cli.major);cliM inor=$(cli.minor);osName=$(cli.major>=4|Trinity|SmartWare);subDirTrinity=$(cli.major>=4|/Trinity);subDirSmartWare=$(cli.major<4|/SmartWare);dhcp66=$(dhcp.66);dhcp67=$(dhcp.67)
location 2 $(dhcp.66)
location 3 $(dhcp.66)/$(system.mac).cfg
location 4 http://$(dhcp.66)/$(dhcp.67)
location 5 http://$(dhcp.66)/$(system.mac).cfg
location 6 tftp://$(dhcp.66)/$(dhcp.67)
location 7 tftp://$(dhcp.66)/$(system.mac).cfg
activation reload immediate

context ip router

interface eth0
ipaddress 192.168.15.20 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

context ip router
route 0.0.0.0 0.0.0.0 192.168.15.200 0

context cs switch

interface isdn IF_S00
route call dest-interface IP_SIP_PBX
no caller-name early-alerting

interface sip IP_SIP_PBX
bind context sip-gateway SIP_GATEWAYS
route call dest-service S_HUNT_ISDN
remote 192.168.15.21 5060
no early-proceeding
early-connect
early-disconnect

service hunt-group S_HUNT_ISDN
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
route call 1 dest-interface IF_S00

context cs switch
no shutdown

context sip-gateway SIP_GATEWAYS

interface 192.168.15.21
bind interface eth0 context router port 5060

context sip-gateway SIP_GATEWAYS
no shutdown

port ethernet 0 0
medium auto
encapsulation ip
bind interface eth0 router
no shutdown

port bri 0 0
clock auto
encapsulation q921

q921
protocol pp
uni-side auto
encapsulation q931

q931
protocol dss1
uni-side net
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_S00 switch

port bri 0 0
no shutdown

Voici les logs de debug:
192.168.15.20>enable
192.168.15.20#debug context sip-gateway transport detail 1
192.168.15.20#debug context sip-gateway signaling detail 1
192.168.15.20#debug ccisdn signaling
192.168.15.20#debug call-router detail 5
192.168.15.20#debug call-control detail 5
192.168.15.20#debug ccisdn error
192.168.15.20#debug isdn event bri 0 0 all
192.168.15.20#17:57:17 ISDN > # 213 [bri 0 0][0] S: sapi: 0 cr=1 ea=0 tei: 0 ea=1 SABME p =1
17:57:18 ISDN > # 214 p: 0 PhPendActivateInd -> l2
17:57:18 ISDN > # 215 [bri 0 0][0] S: sapi: 0 cr=1 ea=0 tei: 0 ea=1 SABME p =1
17:57:19 ISDN > # 216 p: 0 PhActInd -> l2
17:57:19 ISDN > # 217 [bri 0 0][0] S: sapi: 0 cr=1 ea=0 tei: 0 ea=1 SABME p =1
17:57:43 ISDN > # 236 [bri 0 0][0] R: msg too short : 0
17:57:43 ISDN > # 237 [bri 0 0][0] S: sapi: 0 cr=1 ea=0 tei: 0 ea=1 SABME p =1
17:57:44 ISDN > # 238 [bri 0 0][0] S: sapi: 0 cr=1 ea=0 tei: 0 ea=1 SABME p =1
17:57:46 ISDN > # 239 [bri 0 0][0] S: sapi: 0 cr=1 ea=0 tei: 0 ea=1 SABME p =1
17:57:47 ISDN > # 240 [bri 0 0][0] S: sapi: 0 cr=1 ea=0 tei: 0 ea=1 SABME p =1
17:57:48 ISDN > # 241 *delPc N, tei: 0 sapi: 0
17:57:48 ISDN > # 242 p: 0 PhActInd -> l2
17:57:48 ISDN > # 243 *newPc BR-N, tei: 0, sapi: 0
17:57:48 ISDN > # 244 key: 0, Stack:2V01b
17:57:48 ISDN > # 245 EuroISDN
17:57:48 ISDN > # 246 ---> Layer2 tei: 0 sapi: 0 Restart
17:57:48 ISDN > # 247 hex:08 01 00 46 79 01 86
17:57:48 ISDN > # 248 IE: RestartIndicator
17:57:48 ISDN > # 249 new call state : L3PcStRestart1
17:57:48 ISDN > # 250 [bri 0 0][0] S: sapi: 0 cr=1 ea=0 tei: 0 ea=1 SABME p =1
17:57:48 ICC > [IF_S00] Destroying all calls.
17:57:48 ICC > [IF_S00] Destroying active calls.
17:57:48 ICC > [IF_S00] Destroying finished calls.
17:57:48 ICC > [IF_S00] Destroying suspended Calls.
17:57:49 ISDN > # 251 [bri 0 0][0] S: sapi: 0 cr=1 ea=0 tei: 0 ea=1 SABME p =1
17:57:50 ISDN > # 252 [bri 0 0][0] S: sapi: 0 cr=1 ea=0 tei: 0 ea=1 SABME p =1
17:57:51 ISDN > # 253 [bri 0 0][0] S: sapi: 0 cr=1 ea=0 tei: 0 ea=1 SABME p =1
17:57:54 ISDN > # 254 p: 0 PhPendActivateInd -> l2
17:57:54 ISDN > # 255 p: 0 PhActInd -> l2
debug isdn error
192.168.15.20#17:58:30 ISDN > # 256 p: 0 PhPendActivateInd -> l2
17:58:30 ISDN > # 257 p: 0 PhActInd -> l2
17:58:41 ISDN > # 258 [bri 0 0][0] R: sapi: 0 cr=1 ea=0 tei:127 ea=1 UI p =0
17:58:41 ISDN > # 259 [bri 0 0][0] R: sapi: 0 cr=0 ea=0 tei: 99 ea=1 UA f =1
17:58:41 ISDN > # 260 [bri 0 0][0] R: sapi: 0 cr=0 ea=0 tei: 99 ea=1 RR Nr( 1) pf=0
17:59:00 ISDN > # 261 [bri 0 0][0] R: sapi: 0 cr=1 ea=0 tei: 99 ea=1 RR Nr( 1) pf=1
17:59:00 ISDN > # 262 [bri 0 0][0] R: sapi: 0 cr=0 ea=0 tei: 99 ea=1 RR Nr( 1) pf=1
17:59:10 ISDN > # 263 [bri 0 0][0] R: sapi: 0 cr=1 ea=0 tei: 99 ea=1 RR Nr( 1) pf=1
17:59:10 ISDN > # 264 [bri 0 0][0] R: sapi: 0 cr=0 ea=0 tei: 99 ea=1 RR Nr( 1) pf=1
17:59:19 ISDN > # 265 [bri 0 0][0] R: sapi: 0 cr=1 ea=0 tei: 99 ea=1 INFO Nr( 1) Ns( 0) pf=0
17:59:19 ISDN > # 266 [bri 0 0][0] R: sapi: 0 cr=0 ea=0 tei: 99 ea=1 RR Nr( 2) pf=0
17:59:25 ISDN > # 267 [bri 0 0][0] R: sapi: 0 cr=0 ea=0 tei: 99 ea=1 UA f =1
17:59:35 ISDN > # 268 p: 0 PhPendActivateInd -> l2
17:59:36 ISDN > # 269 p: 0 PhActInd -> l2
17:59:48 ISDN > # 270 [bri 0 0][0] TMO : T316 key: 0 tei: 0
17:59:48 ISDE > # 271 ISW: C:\git\smartware/msos/voice/nbis/l3/l3pc.c(226)
17:59:56 ISDN > # 272 [bri 0 0][0] R: sapi: 0 cr=1 ea=0 tei:127 ea=1 UI p =0
17:59:56 ISDN > # 273 [bri 0 0][0] R: sapi: 0 cr=0 ea=0 tei: 99 ea=1 UA f =1
17:59:59 ISDN > # 274 [bri 0 0][0] R: msg too short : 0
18:00:15 ISDN > # 275 [bri 0 0][0] R: sapi: 0 cr=0 ea=0 tei: 99 ea=1 UA f =1
18:00:25 ISDN > # 276 p: 0 PhPendActivateInd -> l2
18:00:26 ISDN > # 277 p: 0 PhActInd -> l2
18:00:29 ISDN > # 278 [bri 0 0][0] R: msg too short : 0
18:00:57 ISDN > # 279 [bri 0 0][0] R: msg too short : 0

Alexxxx
17/09/2016, 20h39
Bonjour,

J'ai préféré remonter un sujet existant plutôt que d'en ouvrir un autre, si jamais vous préférez un nouveau, merci de me le dire :)

Donc voilà, j'ai une Patton SN-DTA, avec un IP nous avons fait le paramétrage que nous supposions utile... sauf que très basiquement, je ne sais pas où indiquer les informations concernant le serveur du trunk SIP, nom d'utilisateur et mot de passe, vous pouvez m'aider s'il vous plaît ?
S'il vous faut le fichier de config, il est en dessous

Merci beaucoup.



#----------------------------------------------------------------#
# #
# SN-DTA/2BIS2V #
# R6.8 2016-05-02 H323 SIP #
# 2016-09-17T17:32:39 #
# SN/00A0BA0BA0D8 #
# Generated configuration file #
# #
#----------------------------------------------------------------#

cli version 3.20
clock local default-offset +00:00
timer PROVISIONING now + 3 minutes "provisioning execute PF_PROVISIONING_CONFIG"
webserver port 80 language en
sntp-client
sntp-client server primary 0.patton.pool.ntp.org port 123 version 4
sntp-client server secondary 1.patton.pool.ntp.org port 123 version 4

system

ic voice 0
low-bitrate-codec g729

system
clock-source 1 bri 0 0
clock-source 2 bri 0 1

profile napt NAPT

profile ppp default

profile tone-set default

profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20

profile pstn default

profile sip default
no autonomous-transitioning

profile aaa default
method 1 local
method 2 none

profile provisioning PF_PROVISIONING_CONFIG
destination configuration
location 1 http://redirect.patton.com/$(system.mac);mac=$(system.mac);serial=$(system.se rial);hwMajor=$(system.hw.major);hwMinor=$(system. hw.minor);swMajor=$(system.sw.major);swMinor=$(sys tem.sw.minor);swDate=$(system.sw.date);productName =$(system.product.name);cliMajor=$(cli.major);cliM inor=$(cli.minor);osName=$(cli.major>=4|Trinity|SmartWare);subDirTrinity=$(cli.major>=4|/Trinity);subDirSmartWare=$(cli.major<4|/SmartWare);dhcp66=$(dhcp.66);dhcp67=$(dhcp.67)
location 2 $(dhcp.66)
location 3 $(dhcp.66)/$(system.mac).cfg
location 4 http://$(dhcp.66)/$(dhcp.67)
location 5 http://$(dhcp.66)/$(system.mac).cfg
location 6 tftp://$(dhcp.66)/$(dhcp.67)
location 7 tftp://$(dhcp.66)/$(system.mac).cfg
activation reload immediate

context ip router

interface eth0
ipaddress 192.168.1.20 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

interface pabx
ipaddress 192.168.1.10 255.255.0.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

context ip router
route 0.0.0.0 0.0.0.0 192.168.1.10 1

context cs switch

routing-table called-ip route_01

complex-function functions_01

interface isdn ISDN1
route call dest-interface IP_SIP_PBX

interface isdn ISDN2
route call dest-interface IP_SIP_PBX

interface sip IP_SIP_PBX
bind context sip-gateway 192.168.1.10
route call dest-service S_HUNT_GROUPS
remote 192.168.1.10 5060
early-connect
early-disconnect

service hunt-group S_HUNT_GROUPS
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
route call 1 dest-interface ISDN1
route call 2 dest-interface ISDN2

context cs switch
no shutdown

authentication-service ProgetCom
username 0990000335066 password WCB3CmqJORfbZVqxIEmSCA== encrypted

location-service default

context sip-gateway 192.168.1.10

interface sip3.openvno.net
bind interface eth0 context router port 5060

context sip-gateway 192.168.1.10
bind location-service default
no shutdown

port ethernet 0 0
medium auto
encapsulation ip
bind interface eth0 router
no shutdown

port bri 0 0
clock auto
encapsulation q921

q921
permanent-layer2
protocol pp
uni-side auto
encapsulation q931

q931
protocol dss1
uni-side net
bchan-number-order ascending
encapsulation cc-isdn
bind interface ISDN1 switch

port bri 0 0
no shutdown

port bri 0 1
clock auto
encapsulation q921

q921
permanent-layer2
protocol pp
uni-side user
encapsulation q931

q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface ISDN2 switch

port bri 0 1
no shutdown