PDA

Voir la version complète : Installer Carte Digium TE110P



Jet
22/02/2011, 14h26
Bonjour,
C'est ma première installation d'Asterisk avec une carte E1.
J'ai installé freepbx avec Asterisk 1.6.2.16.1, et une carte Digium TE110P, qui est bien chargée et je n'ai pas d'alarme.
Je n'arrive pas a faire ni des appels entrants ni sortants.
En essayant de faire un appel sortant j'ai le message de congestion, voici les traces :
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/101-00000002", "DAHDI/g0/0522779353,300,") in new stack
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [s@macro-dialout-trunk:20] NoOp("SIP/101-00000002", "Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 34") in new stack
-- Executing [s@macro-dialout-trunk:21] Goto("SIP/101-00000002", "s-CONGESTION,1") in new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,1)
-- Executing [s-CONGESTION@macro-dialout-trunk:1] Set("SIP/101-00000002", "RC=34") in new stack

les channels sont bien en services :

localhost*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default default In Service
1 from-pstn default In Service
2 from-pstn default In Service
3 from-pstn default In Service
4 from-pstn default In Service
5 from-pstn default In Service
6 from-pstn default In Service
7 from-pstn default In Service
8 from-pstn default In Service
9 from-pstn default In Service
10 from-pstn default In Service
11 from-pstn default In Service
12 from-pstn default In Service
13 from-pstn default In Service
14 from-pstn default In Service
15 from-pstn default In Service
17 from-pstn default In Service
18 from-pstn default In Service
19 from-pstn default In Service
20 from-pstn default In Service
21 from-pstn default In Service
22 from-pstn default In Service
23 from-pstn default In Service
24 from-pstn default In Service
25 from-pstn default In Service
26 from-pstn default In Service
27 from-pstn default In Service
28 from-pstn default In Service
29 from-pstn default In Service
30 from-pstn default In Service
31 from-pstn default In Service

Merci pour votre aide

ffossard
22/02/2011, 16h54
Comme à chaque fois, il va nous falloir les fichiers de configuration de Dahdi.
Je déplace votre sujet dans la catégorie "Matériels" puisqu'il s'agît de la configuration de la carte.

Jet
23/02/2011, 10h36
Bonjour,
le problème est reglé, il fallait juste activer le CRC, mais ce qui est "anormal" c'est que avec ou sans le CRC (configuré au niveau de l'interface Freepbx) il n'y a pas d'alarme.
Merci pour votre réponse.

ffossard
23/02/2011, 15h35
Pour l'alarme et le CRC, posez la question à Digium (sur leur forum), ils vous donneront peut-être la réponse :)