call confirm

bon soir,
l'option call confirm de freepbx me pose une petite interrogation, une voix anglaise quand je décroche mon tel portable ligne 06xxxxxxx me dit je pense taper 1 ou 2. je fais cette opération et rien ne se passe.
Est ce un problème connu ?.

Une problème DTMF est possible, tes touches passent en ivr normal ?

oui en ivr pas de soucis cela fonctionne, mais cette option ne fonctionne pas et en plus , j'ai grave besoin. il est pas possible aussi que la voix soit en français.

y a t il un paramètre a changer?

Citation:

oui en ivr pas de soucis cela fonctionne, mais cette option ne fonctionne pas et en plus

Ça fonctionne ou pas ?
Pour les fichiers son ils se trouvent sous /var/lib/asterisk/sounds

fonction ivr oui
call confirm quand je tape 1 ou 2 NON
quel fichier je modifie ? pour avoir la voix fr pour call confirm car j'ai déjà importer des voix française

D'abord trace sur la console ce qui ce passe pendant tes choix. Utilise pastebin pour nous montrer.

Pour logger les DTMF, tu dois éditer ton /etc/asterisk/logger.conf et ajouter l'option dtmf à l'un de tes fichiers de logs, par exemple :
full => notice,warning,error,debug,verbose, dtmf

Il convient ensuite de surveiller ton full pendant un appel pour voir si le serveur reçoit ou non tes DTMF :
tail -f /var/log/asterisk/full

./Kriss

Code:

tail -f /var/log/asterisk/full [2012-05-24 12:07:43] NOTICE[2959] chan_sip.c: Registration from 'Fax Gestan <si p:101@192.168.1.6>' failed for '192.168.1.16:5060' - Peer is not supposed to reg ister [2012-05-24 12:07:43] ERROR[2959] chan_sip.c: Peer 'pstn' is trying to register, but not configured as host=dynamic [2012-05-24 12:07:43] NOTICE[2959] chan_sip.c: Registration from '<sip:pstn@192. 168.1.6>' failed for '192.168.1.16:5060' - Peer is not supposed to register [2012-05-24 12:07:43] ERROR[2959] chan_sip.c: Peer '101' is trying to register, but not configured as host=dynamic [2012-05-24 12:07:43] NOTICE[2959] chan_sip.c: Registration from 'Fax Gestan <si p:101@192.168.1.6>' failed for '192.168.1.16:5060' - Peer is not supposed to reg ister [2012-05-24 12:07:43] ERROR[2959] chan_sip.c: Peer 'pstn' is trying to register, but not configured as host=dynamic [2012-05-24 12:07:43] NOTICE[2959] chan_sip.c: Registration from '<sip:pstn@192. 168.1.6>' failed for '192.168.1.16:5060' - Peer is not supposed to register [2012-05-24 12:10:45] WARNING[2959] chan_sip.c: Got 423 Interval too brief for s ervice 0951147663@freephonie.net, minimum is 1800 seconds [2012-05-24 12:10:48] WARNING[2959] chan_sip.c: Got 423 Interval too brief for s ervice 0954055346@freephonie.net, minimum is 1800 seconds [2012-05-24 12:12:45] VERBOSE[13995] asterisk.c: -- Remote UNIX connection d isconnected

asterisk -r

Code:

-- Executing [zap2dahdi@macro-dial-one:7] Set("Local/100@from-queue-07e8;2", "NEWDIAL=SIP/100&") in new stack -- Executing [zap2dahdi@macro-dial-one:8] Set("Local/100@from-queue-07e8;2", "ITER2=2") in new stack -- Executing [zap2dahdi@macro-dial-one:9] GotoIf("Local/100@from-queue-07e8;2", "0?begin2") in new stack -- Executing [zap2dahdi@macro-dial-one:10] Set("Local/100@from-queue-07e8;2", "THISDIAL=SIP/100") in new stack -- Executing [zap2dahdi@macro-dial-one:11] Return("Local/100@from-queue-07e8;2", "") in new stack -- Executing [dstring@macro-dial-one:9] Set("Local/100@from-queue-07e8;2", "DSTRING=SIP/100&") in new stack -- Executing [dstring@macro-dial-one:10] Set("Local/100@from-queue-07e8;2", "ITER=2") in new stack -- Executing [dstring@macro-dial-one:11] GotoIf("Local/100@from-queue-07e8;2", "0?begin") in new stack -- Executing [dstring@macro-dial-one:12] Set("Local/100@from-queue-07e8;2", "DSTRING=SIP/100") in new stack -- Executing [dstring@macro-dial-one:13] Return("Local/100@from-queue-07e8;2", "") in new stack -- Executing [s@macro-dial-one:27] GotoIf("Local/100@from-queue-07e8;2", "0?nodial") in new stack -- Executing [s@macro-dial-one:28] GotoIf("Local/100@from-queue-07e8;2", "0?skiptrace") in new stack -- Executing [s@macro-dial-one:29] GosubIf("Local/100@from-queue-07e8;2", "1?ctset,1:ctclear,1") in new stack -- Executing [ctset@macro-dial-one:1] Set("Local/100@from-queue-07e8;2", "DB(CALLTRACE/100)=0285455001") in new stack -- Executing [ctset@macro-dial-one:2] Return("Local/100@from-queue-07e8;2", "") in new stack -- Executing [s@macro-dial-one:30] Set("Local/100@from-queue-07e8;2", "D_OPTIONS=trM(auto-blkvm)") in new stack -- Executing [s@macro-dial-one:31] ExecIf("Local/100@from-queue-07e8;2", "0?SIPAddHeader(Alert-Info: )") in new stack -- Executing [s@macro-dial-one:32] ExecIf("Local/100@from-queue-07e8;2", "0?SIPAddHeader()") in new stack -- Executing [s@macro-dial-one:33] ExecIf("Local/100@from-queue-07e8;2", "1?Set(CHANNEL(musicclass)=HugoProd-)") in new stack -- Executing [s@macro-dial-one:34] GosubIf("Local/100@from-queue-07e8;2", "0?qwait,1") in new stack -- Executing [s@macro-dial-one:35] Set("Local/100@from-queue-07e8;2", "__CWIGNORE=") in new stack -- Executing [s@macro-dial-one:36] Set("Local/100@from-queue-07e8;2", "__KEEPCID=TRUE") in new stack -- Executing [s@macro-dial-one:37] GotoIf("Local/100@from-queue-07e8;2", "0?usegoto,1") in new stack -- Executing [s@macro-dial-one:38] GotoIf("Local/100@from-queue-07e8;2", "1?godial") in new stack -- Goto (macro-dial-one,s,42) -- Executing [s@macro-dial-one:42] Dial("Local/100@from-queue-07e8;2", "SIP/100,5,trM(auto-blkvm)") in new stack == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Called SIP/100 -- Local/100@from-queue-07e8;1 is ringing -- Local/100@from-queue-07e8;1 connected line has changed. Saving it until answer for SIP/100-000000d6 -- Local/100@from-queue-07e8;1 connected line has changed. Saving it until answer for SIP/100-000000d6 -- SIP/100-000000dd is ringing -- Local/100@from-queue-07e8;1 is ringing -- Nobody picked up in 5000 ms -- Executing [s@macro-dial-one:43] ExecIf("Local/100@from-queue-07e8;2", "1?Set(DIALSTATUS=BUSY)") in new stack -- Executing [s@macro-dial-one:44] GosubIf("Local/100@from-queue-07e8;2", "0?s-BUSY,1") in new stack -- Executing [s@macro-dial-one:45] MacroExit("Local/100@from-queue-07e8;2", "") in new stack -- Executing [s@macro-exten-vm:15] Set("Local/100@from-queue-07e8;2", "SV_DIALSTATUS=BUSY") in new stack -- Executing [s@macro-exten-vm:16] GosubIf("Local/100@from-queue-07e8;2", "0?docfu,1") in new stack -- Executing [s@macro-exten-vm:17] GosubIf("Local/100@from-queue-07e8;2", "0?docfb,1") in new stack -- Executing [s@macro-exten-vm:18] Set("Local/100@from-queue-07e8;2", "DIALSTATUS=BUSY") in new stack -- Executing [s@macro-exten-vm:19] ExecIf("Local/100@from-queue-07e8;2", "0?MacroExit()") in new stack -- Executing [s@macro-exten-vm:20] GotoIf("Local/100@from-queue-07e8;2", "0?s-BUSY,1") in new stack -- Executing [s@macro-exten-vm:21] Macro("Local/100@from-queue-07e8;2", "vm,100,BUSY,") in new stack -- Executing [s@macro-vm:1] Macro("Local/100@from-queue-07e8;2", "user-callerid,SKIPTTL") in new stack -- Executing [s@macro-user-callerid:1] Set("Local/100@from-queue-07e8;2", "AMPUSER=0285455001") in new stack -- Executing [s@macro-user-callerid:2] GotoIf("Local/100@from-queue-07e8;2", "1?report") in new stack -- Goto (macro-user-callerid,s,13) -- Executing [s@macro-user-callerid:13] GotoIf("Local/100@from-queue-07e8;2", "1?continue") in new stack -- Goto (macro-user-callerid,s,26) -- Executing [s@macro-user-callerid:26] Set("Local/100@from-queue-07e8;2", "CALLERID(number)=0285455001") in new stack -- Executing [s@macro-user-callerid:27] Set("Local/100@from-queue-07e8;2", "CALLERID(name)=HugoProd / Standard") in new stack -- Executing [s@macro-user-callerid:28] Set("Local/100@from-queue-07e8;2", "CHANNEL(language)=fr") in new stack -- Executing [s@macro-vm:2] Set("Local/100@from-queue-07e8;2", "VMGAIN=""") in new stack -- Executing [s@macro-vm:3] Macro("Local/100@from-queue-07e8;2", "blkvm-check,") in new stack -- Executing [s@macro-blkvm-check:1] Set("Local/100@from-queue-07e8;2", "GOSUB_RETVAL=TRUE") in new stack -- Executing [s@macro-blkvm-check:2] MacroExit("Local/100@from-queue-07e8;2", "") in new stack -- Executing [s@macro-vm:4] GotoIf("Local/100@from-queue-07e8;2", "0?vmx,1") in new stack -- Executing [s@macro-vm:5] Hangup("Local/100@from-queue-07e8;2", "") in new stack == Spawn extension (macro-vm, s, 5) exited non-zero on 'Local/100@from-queue-07e8;2' in macro 'vm' == Spawn extension (macro-exten-vm, s, 21) exited non-zero on 'Local/100@from-queue-07e8;2' in macro 'exten-vm' == Spawn extension (from-internal, 100, 2) exited non-zero on 'Local/100@from-queue-07e8;2' -- Executing [h@from-internal:1] Hangup("Local/100@from-queue-07e8;2", "") in new stack == Spawn extension (from-internal, h, 1) exited non-zero on 'Local/100@from-queue-07e8;2' -- Nobody picked up in 5000 ms -- Executing [s@macro-confirm:5] Read("SIP/FreeTelecom2Out-000000da", "INPUT,,1,,,4") in new stack -- Accepting a maximum of 1 digits. -- User disconnected == Spawn extension (macro-dialout-trunk, s, 20) exited non-zero on 'Local/006@from-queue-9487;2' in macro 'dialout-trunk' == Spawn extension (from-internal, 0060, 5) exited non-zero on 'Local/0060@from-queue-9487;2' -- Executing [h@from-internal:1] Hangup("Local/00629736460@from-queue-9487;2", "") in new stack == Spawn extension (from-internal, h, 1) exited non-zero on 'Local/0066@from-queue-9487;2' localhost*CLI>

quand je tape 1 ou deux rien ne ce passe dans la console, et j'ai remarqué avec mon GXP-2000 pour la boite vocale quand je tape 1 oui 2 rien ne se passe aussi.

que faire ?

Est ce une erreur connue, cela peut il venir des DTMF?