[Résolu] "PRI HDLC Overrun" sur numeris
Bonjour,
il m'arrive de temps en temps que ma ligne numeris ne soit plus joignable et en regardant les logs je suis floodé par le même message d'erreur :
Code:
[2012-12-03 11:26:38] VERBOSE[14390] chan_dahdi.c: -- Hungup 'DAHDI/18-1'
[2012-12-03 11:26:38] VERBOSE[14390] app_macro.c: == Spawn extension (macro-dialout-trunk, s, 22) exited non-zero on 'SIP/203-000000a4' in macro 'dialout-trunk'
[2012-12-03 11:26:38] VERBOSE[14390] pbx.c: == Spawn extension (from-internal, 032XXXXXXX, 5) exited non-zero on 'SIP/203-000000a4'
[2012-12-03 11:26:49] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
[2012-12-03 11:26:50] NOTICE[31766] sig_analog.c: Alarm cleared on channel 17
[2012-12-03 11:26:50] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
[2012-12-03 11:26:50] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
[2012-12-03 11:26:51] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
[2012-12-03 11:26:52] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
[2012-12-03 11:26:52] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
[2012-12-03 11:26:53] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
[2012-12-03 11:26:53] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
[2012-12-03 11:26:54] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
[2012-12-03 11:26:54] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
[2012-12-03 11:26:55] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
[2012-12-03 11:26:55] NOTICE[31762] chan_dahdi.c: PRI got event: HDLC Overrun (7) on D-channel of span 1
Seul un /etc/init.d/asterisk restart "règle" le souci.
Quelqu'un a-t-il une piste ? Car je ne trouve pas grand chose sur ça.
Voici mon fichier /etc/dahdi/system.conf :
Code:
# Autogenerated by /usr/sbin/dahdi_genconf on Sun Nov 18 16:38:38 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCBRI/0/0 "HA8-0000" AMI/CCS RED
span=1,1,0,ccs,ami,term,te
# termtype: te
bchan=1-2
hardhdlc=3
echocanceller=mg2,1-2
# Span 2: WCBRI/0/1 "HA8-0000" AMI/CCS RED
span=2,2,0,ccs,ami,term,te
# termtype: te
bchan=4-5
hardhdlc=6
echocanceller=mg2,4-5
# Span 3: WCBRI/0/2 "HA8-0000" AMI/CCS RED
span=3,3,0,ccs,ami,term,te
# termtype: te
bchan=7-8
hardhdlc=9
echocanceller=mg2,7-8
# Span 4: WCBRI/0/3 "HA8-0000" AMI/CCS RED
span=4,4,0,ccs,ami,term,te
# termtype: te
bchan=10-11
hardhdlc=12
echocanceller=mg2,10-11
# Span 5: WCTDM/0 "HA8-0000" (MASTER)
# channel 13, WCTDM/0/0, no module.
# channel 14, WCTDM/0/1, no module.
# channel 15, WCTDM/0/2, no module.
# channel 16, WCTDM/0/3, no module.
fxsks=17
echocanceller=mg2,17
fxsks=18
echocanceller=mg2,18
# channel 19, WCTDM/0/6, no module.
# channel 20, WCTDM/0/7, no module.
# Global data
loadzone = fr
defaultzone = fr
/etc/asterisk/dahdi-channels.conf :
Code:
; Autogenerated by /usr/sbin/dahdi_genconf on Sun Nov 18 16:38:38 2012
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;
; Span 1: WCBRI/0/0 "HA8-0000" AMI/CCS RED
group=0,11
context=from-dahdi
switchtype=euroisdn
signalling=bri_cpe_ptmp
channel => 1-2
context=default
group=63
; Span 2: WCBRI/0/1 "HA8-0000" AMI/CCS RED
group=0,12
context=from-pstn
switchtype=euroisdn
signalling=bri_cpe_ptmp
channel => 4-5
context=default
group=63
; Span 3: WCBRI/0/2 "HA8-0000" AMI/CCS RED
group=0,13
context=from-pstn
switchtype=euroisdn
signalling=bri_cpe_ptmp
channel => 7-8
context=default
group=63
; Span 4: WCBRI/0/3 "HA8-0000" AMI/CCS RED
group=0,14
context=from-pstn
switchtype=euroisdn
signalling=bri_cpe_ptmp
channel => 10-11
context=default
group=63
; Span 5: WCTDM/0 "HA8-0000" (MASTER)
;;; line="17 WCTDM/0/4 FXSKS (EC: VPMADT032 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-dahdi
channel => 17
callerid=
group=
context=default
;;; line="18 WCTDM/0/5 FXSKS (EC: VPMADT032 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-dahdi
channel => 18
callerid=
group=
context=default
J'utilise une ligne numeris sur le port 1 de ma carte HA8 et une ligne analogique Livebox sur le port 6.
Merci.
