Patton 4552

[titilim]

Hélas non je ne peux pas proceder a l'echange car je dois mettre la passerelle au plus vite en production :(
Pour palier au manque de doc sur cette version je viens d'installer 3cs pour avoir une idee de config et la voici :

webserver port 80 language en

system

ic voice 0

system
clock-source 0 0

profile ppp default


profile call-progress-tone defaultDialtone
flush-play-list
play 1 1000 440 0

profile call-progress-tone defaultAlertingtone
flush-play-list
play 1 1500 440 -7
pause 2 3500

profile call-progress-tone defaultBusytone
flush-play-list
play 1 500 440 -7
pause 2 500

profile call-progress-tone defaultReleasetone
flush-play-list
play 1 250 425 -7
pause 2 250

profile call-progress-tone defaultCongestiontone
flush-play-list
play 1 250 425 -7
pause 2 250


profile tone-set default

profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
fax transmission relay t38-udp

profile pstn default

profile sip default

profile aaa default
method 1 local
method 2 none

context ip router

interface IF_IP_WAN
ipaddress dhcp
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

interface IF_IP_LAN
ipaddress 192.168.162.202 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

context cs switch

mapping-table calling-pi to calling-e164 MAP_REMOVE_BLANK_CALLERID
map restricted to ""

mapping-table calling-e164 to calling-e164 MAP_LEADING_ZERO

map (.%) to \1


mapping-table calling-e164 to calling-name MAP_CID_TO_CNAME
map (.%) to \1

complex-function MAPPING_INCOMING_CALLS
execute 1 MAP_REMOVE_BLANK_CALLERID
execute 2 MAP_LEADING_ZERO


routing-table called-e164 RT_ISDN_TO_SIP_0
route T2 dest-interface IF_SIP_0 MAPPING_INCOMING_CALLS

interface isdn IF_ISDN_0
route call dest-table RT_ISDN_TO_SIP_0
user-side-ringback-tone
call-hold disable

interface sip IF_SIP_0
bind context sip-gateway GW_SIP_0

early-connect

early-disconnect
route call dest-interface IF_ISDN_0
remote 192.168.162.200 5060
address-translation outgoing-call request-uri user-part fix 10001 host-part to-header target-param none
address-translation incoming-call called-e164 request-uri

context cs switch
no shutdown

authentication-service AS_ALL_LINES
realm 1 192.168.162.200
username 10001 password 10001

location-service LS_10001
domain 1 192.168.162.200

identity-group default
authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 10001

identity 10001
authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 192.168.162.200 5060
lifetime 300
register auto

context sip-gateway GW_SIP_0

interface LAN
bind interface IF_IP_LAN context router port 5060

context sip-gateway GW_SIP_0
bind location-service LS_10001
no shutdown

port ethernet 0 0
encapsulation ip
bind interface IF_IP_WAN router
no shutdown

port ethernet 0 1
encapsulation ip
bind interface IF_IP_LAN router
no shutdown

port bri 0 0
clock auto
encapsulation q921

q921

protocol pp

uni-side auto
encapsulation q931

q931

protocol dss1

uni-side user
encapsulation cc-isdn
bind interface IF_ISDN_0 switch

port bri 0 0
no shutdown

par contre j'ai eu ce matin FT soit disant qu'il y a un defaut de ligne sur l'acces de base mais pas de tek pour aujourd'hui mais si tu peux me donner ton avis sur cette config ce serait super