Hélas non je ne peux pas proceder a l'echange car je dois mettre la passerelle au plus vite en production :(
Pour palier au manque de doc sur cette version je viens d'installer 3cs pour avoir une idee de config et la voici :
webserver port 80 language en
system
ic voice 0
system
clock-source 0 0
profile ppp default
profile call-progress-tone defaultDialtone
flush-play-list
play 1 1000 440 0
profile call-progress-tone defaultAlertingtone
flush-play-list
play 1 1500 440 -7
pause 2 3500
profile call-progress-tone defaultBusytone
flush-play-list
play 1 500 440 -7
pause 2 500
profile call-progress-tone defaultReleasetone
flush-play-list
play 1 250 425 -7
pause 2 250
profile call-progress-tone defaultCongestiontone
flush-play-list
play 1 250 425 -7
pause 2 250
profile tone-set default
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
fax transmission relay t38-udp
profile pstn default
profile sip default
profile aaa default
method 1 local
method 2 none
context ip router
interface IF_IP_WAN
ipaddress dhcp
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
interface IF_IP_LAN
ipaddress 192.168.162.202 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context cs switch
mapping-table calling-pi to calling-e164 MAP_REMOVE_BLANK_CALLERID
map restricted to ""
mapping-table calling-e164 to calling-e164 MAP_LEADING_ZERO
map (.%) to \1
mapping-table calling-e164 to calling-name MAP_CID_TO_CNAME
map (.%) to \1
complex-function MAPPING_INCOMING_CALLS
execute 1 MAP_REMOVE_BLANK_CALLERID
execute 2 MAP_LEADING_ZERO
routing-table called-e164 RT_ISDN_TO_SIP_0
route T2 dest-interface IF_SIP_0 MAPPING_INCOMING_CALLS
interface isdn IF_ISDN_0
route call dest-table RT_ISDN_TO_SIP_0
user-side-ringback-tone
call-hold disable
interface sip IF_SIP_0
bind context sip-gateway GW_SIP_0
early-connect
early-disconnect
route call dest-interface IF_ISDN_0
remote 192.168.162.200 5060
address-translation outgoing-call request-uri user-part fix 10001 host-part to-header target-param none
address-translation incoming-call called-e164 request-uri
context cs switch
no shutdown
authentication-service AS_ALL_LINES
realm 1 192.168.162.200
username 10001 password 10001
location-service LS_10001
domain 1 192.168.162.200
identity-group default
authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 10001
identity 10001
authentication outbound
authenticate 1 authentication-service AS_ALL_LINES
registration outbound
registrar 192.168.162.200 5060
lifetime 300
register auto
context sip-gateway GW_SIP_0
interface LAN
bind interface IF_IP_LAN context router port 5060
context sip-gateway GW_SIP_0
bind location-service LS_10001
no shutdown
port ethernet 0 0
encapsulation ip
bind interface IF_IP_WAN router
no shutdown
port ethernet 0 1
encapsulation ip
bind interface IF_IP_LAN router
no shutdown
port bri 0 0
clock auto
encapsulation q921
q921
protocol pp
uni-side auto
encapsulation q931
q931
protocol dss1
uni-side user
encapsulation cc-isdn
bind interface IF_ISDN_0 switch
port bri 0 0
no shutdown
par contre j'ai eu ce matin FT soit disant qu'il y a un defaut de ligne sur l'acces de base mais pas de tek pour aujourd'hui mais si tu peux me donner ton avis sur cette config ce serait super
Répondre avec citation
Envoyé par titilim
