Xivo en tant que passerelle NT Numéris

[TRUST]

Bonjour
J'ai installé un XIVO avec une carte B410P en mode NT.

Derriere il y a un PBAX avaya Office IP 500.

Au travers du xivo vers Avaya, cela fonctionne, j'arrive à passer une SDAà l'avaya et donc contacter un poste téléphonique.

Par contre en sortie l'avaya me transmet mal le numéro qu'il cherche à joindre.

on voit dans les logs ci-joint qu'il me transmet le dad sur 4 digits ou XIVO_DSTNUM aussi

Sur des lignes FT l'avaya fonctionne donc je pense que j'ai mal configuré quelque chose dans mes fichiers de conf


Merci de votre aide



Verbosity is at least 5
P[ 1] --> lib: prim 30582 dinfo 5e0000
P[ 1] channel with stid:0 not in use!
P[ 1] --> new_process: New L3Id: 5e0000
P[ 1] set_channel: bc->channel:0 channel:-1
P[ 1] NO USERUESRINFO
P[ 1] find_free_chan: req_chan:0
P[ 1] --> found chan: 1
P[ 1] set_chan_in_stack: 1
P[ 1] Idx:0 stack->cchan:0 in_use:1 Chan:1
P[ 1] Idx:1 stack->cchan:0 in_use:0 Chan:2
P[ 1] Idx:2 stack->cchan:0 in_use:0 Chan:3
P[ 1] $$$ find_chan: No channel found for oad:03XXXXXXX dad:0618
P[ 1] I IND :SETUP oad:03XXXXXXX dad:0618 pid:4 state:none
P[ 1] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan: cpnnumplan:0
P[ 1] --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> addr:50010102 l3id:5e0000 b_stid:0 layer_id:50010180
P[ 1] --> facility:Fac_None out_facility:Fac_None
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> bc:0x92ec724 h:0 sh:0
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] $$$ find_chan: No channel found for oad:03XXXXXXX dad:0618
P[ 1] --> Bearer: Speech
P[ 1] --> Codec: Alaw
P[ 0] --> * NEW CHANNEL dad:0618 oad:03XXXXXXX
P[ 1] read_config: Getting Config
P[ 1] config_jb: Called
P[ 1] --> * CallGrp: PickupGrp:
P[ 1] --> CTON: Unknown
P[ 1] --> EXPORT_PID: pid:4
P[ 1] --> PRES: Allowed (0)
P[ 1] --> SCREEN: Unscreened (0)
P[ 1] * Queuing chan 0x95b02a0
P[ 1] CONTEXT:from-extern
P[ 1] SENDEVENT: stack->nt:1 stack->upperid:40000101
P[ 1] I SEND:PROCEEDING oad:03XXXXXXX dad:0618 pid:4
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan: cpnnumplan:0
P[ 1] --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> addr:50010102 l3id:5e0000 b_stid:0 layer_id:50010180
P[ 1] --> facility:Fac_None out_facility:Fac_None
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> bc:0x92ec724 h:0 sh:0
P[ 1] $$$ Setting up bc with stid :10010100
P[ 1] setup_bc: with dsp
P[ 1] --> Channel is 1
P[ 1] --> TRANSPARENT Mode
P[ 1] $$$ Bchan Activated addr 50010102
P[ 1] BC_STATE_CHANGE: l3id:5e0000 from:BCHAN_CLEANED to:BCHAN_ACTIVATED
P[ 1] BCHAN: bchan ACT Confirm pid:4
P[ 1] Transmitting 78 samples of silence to misdn
[Jul 28 10:39:30] -- Executing Macro("mISDN/1-u2", "outcall|14")
[Jul 28 10:39:30] -- Executing [s@macro-outcall:1] Set("mISDN/1-u2", "XIVO_DSTID=14") in new stack
[Jul 28 10:39:30] -- Executing [s@macro-outcall:2] Gosub("mISDN/1-u2", "xivo-originate_switch_callerids|s|1") in new stack
[Jul 28 10:39:30] -- Executing [s@xivo-originate_switch_callerids:1] GotoIf("mISDN/1-u2", "0?:exit") in new stack
[Jul 28 10:39:30] -- Goto (xivo-originate_switch_callerids,s,3)
[Jul 28 10:39:30] -- Executing [s@xivo-originate_switch_callerids:3] Return("mISDN/1-u2", "") in new stack
[Jul 28 10:39:30] -- Executing [s@macro-outcall:3] Set("mISDN/1-u2", "XIVO_SRCNUM=03XXXXXXX") in new stack
[Jul 28 10:39:30] -- Executing [s@macro-outcall:4] Set("mISDN/1-u2", "XIVO_DSTNUM=0618") in new stack
[Jul 28 10:39:30] -- Executing [s@macro-outcall:5] Set("mISDN/1-u2", "XIVO_CONTEXT=from-extern") in new stack
[Jul 28 10:39:30] -- Executing [s@macro-outcall:6] UserEvent("mISDN/1-u2", "MacroOutcall|UNIQUEID: 1311842370.4|CHANNEL: mISDN/1-u2|XIVO_USERID: |XIVO_DSTID: 14|XIVO_SRCNUM: 03XXXXXXX|XIVO_DSTNUM: 0618|XIVO_CONTEXT: from-extern") in new stack
[Jul 28 10:39:30] -- Executing [s@macro-outcall:7] AGI("mISDN/1-u2", "agi://127.0.0.1/outgoing_user_set_features") in new stack
P[ 1] Transmitting 128 samples of silence to misdn
[Jul 28 10:39:30] agi://127.0.0.1/outgoing_user_set_features: AGI handler 'outgoing_user_set_features' successfully executed
[Jul 28 10:39:30] -- AGI Script agi://127.0.0.1/outgoing_user_set_features completed, returning 0
[Jul 28 10:39:30] -- Executing [s@macro-outcall:8] GotoIf("mISDN/1-u2", "?:nosubroutine") in new stack
[Jul 28 10:39:30] -- Goto (macro-outcall,s,11)
[Jul 28 10:39:30] -- Executing [s@macro-outcall:11] Gosub("mISDN/1-u2", "xivo-user_rights_check|s|1") in new stack
[Jul 28 10:39:30] -- Executing [s@xivo-user_rights_check:1] AGI("mISDN/1-u2", "agi://127.0.0.1/user_set_call_rights") in new stack
P[ 1] Transmitting 128 samples of silence to misdn
[Jul 28 10:39:30] agi://127.0.0.1/user_set_call_rights: AGI handler 'user_set_call_rights' successfully executed
[Jul 28 10:39:30] -- AGI Script agi://127.0.0.1/user_set_call_rights completed, returning 0
[Jul 28 10:39:30] -- Executing [s@xivo-user_rights_check:2] GotoIf("mISDN/1-u2", "ALLOW?:error|1") in new stack
[Jul 28 10:39:30] -- Executing [s@xivo-user_rights_check:3] GotoIf("mISDN/1-u2", "1?allow|1") in new stack
[Jul 28 10:39:30] -- Goto (xivo-user_rights_check,allow,1)
[Jul 28 10:39:30] -- Executing [allow@xivo-user_rights_check:1] NoOp("mISDN/1-u2", "User allowed to make call") in new stack
[Jul 28 10:39:30] -- Executing [allow@xivo-user_rights_check:2] Return("mISDN/1-u2", "") in new stack
[Jul 28 10:39:30] -- Executing [s@macro-outcall:12] GotoIf("mISDN/1-u2", "?:14") in new stack
[Jul 28 10:39:30] -- Goto (macro-outcall,s,14)
[Jul 28 10:39:30] -- Executing [s@macro-outcall:14] GotoIf("mISDN/1-u2", "IAX2/002997-spc?:error|1") in new stack
[Jul 28 10:39:30] -- Executing [s@macro-outcall:15] Gosub("mISDN/1-u2", "xivo-pause_agent|s|1") in new stack
[Jul 28 10:39:30] -- Executing [s@xivo-pause_agent:1] GotoIf("mISDN/1-u2", "0?:exit") in new stack
[Jul 28 10:39:30] -- Goto (xivo-pause_agent,s,8)
[Jul 28 10:39:30] -- Executing [s@xivo-pause_agent:8] Return("mISDN/1-u2", "") in new stack
[Jul 28 10:39:30] -- Executing [s@macro-outcall:16] Set("mISDN/1-u2", "TRUNKINDEX=0") in new stack
[Jul 28 10:39:30] -- Executing [s@macro-outcall:17] Goto("mISDN/1-u2", "dial|1") in new stack
[Jul 28 10:39:30] -- Goto (macro-outcall,dial,1)
[Jul 28 10:39:30] -- Executing [dial@macro-outcall:1] Set("mISDN/1-u2", "INTERFACE=IAX2/002997-spc") in new stack
[Jul 28 10:39:30] -- Executing [dial@macro-outcall:2] Set("mISDN/1-u2", "TRUNKEXTEN=0618") in new stack
[Jul 28 10:39:30] -- Executing [dial@macro-outcall:3] Set("mISDN/1-u2", "TRUNKSUFFIX=") in new stack
[Jul 28 10:39:30] -- Executing [dial@macro-outcall:4] Dial("mISDN/1-u2", "IAX2/002997-spc/0618||") in new stack
[Jul 28 10:39:30] -- Called 002997-spc/0618
P[ 1] Transmitting 128 samples of silence to misdn
P[ 1] Transmitting 128 samples of silence to misdn
P[ 1] Transmitting 128 samples of silence to misdn
P[ 1] Transmitting 128 samples of silence to misdn
[Jul 28 10:39:30] WARNING[2269]: chan_iax2.c:9251 socket_process: Call rejected by 91.213.102.94: No such context/extension
[Jul 28 10:39:30] -- Hungup 'IAX2/002997-spc-1175'
[Jul 28 10:39:30] == Everyone is busy/congested at this time (1:0/0/1)
[Jul 28 10:39:30] -- Executing [dial@macro-outcall:5] Goto("mISDN/1-u2", "CHANUNAVAIL|1") in new stack
[Jul 28 10:39:30] -- Goto (macro-outcall,CHANUNAVAIL,1)
[Jul 28 10:39:30] -- Executing [CHANUNAVAIL@macro-outcall:1] Goto("mISDN/1-u2", "redial|1") in new stack
[Jul 28 10:39:30] -- Goto (macro-outcall,redial,1)
[Jul 28 10:39:30] -- Executing [redial@macro-outcall:1] Set("mISDN/1-u2", "TRUNKINDEX=1") in new stack
[Jul 28 10:39:30] -- Executing [redial@macro-outcall:2] GotoIf("mISDN/1-u2", "?dial|1") in new stack
[Jul 28 10:39:30] -- Executing [redial@macro-outcall:3] Playback("mISDN/1-u2", "congestion-call") in new stack
P[ 1] * ANSWER:
P[ 1] --> Connection is without BF encryption
P[ 1] --> None
P[ 1] --> empty cad using dad
P[ 1] SENDEVENT: stack->nt:1 stack->upperid:40000101
P[ 1] I SEND:CONNECT oad:03XXXXXXX dad:0618 pid:4
P[ 1] --> bc_state:BCHAN_ACTIVATED
P[ 1] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:0618
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan: cpnnumplan:0
P[ 1] --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> addr:50010102 l3id:5e0000 b_stid:10010100 layer_id:50010180
P[ 1] --> facility:Fac_None out_facility:Fac_None
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> bc:0x92ec724 h:0 sh:0
P[ 1] $$$ bc already setup stid :10010100 (state:BCHAN_ACTIVATED)
P[ 1] ph_control: c1:2100 c2:0
P[ 1] ec_enable
P[ 1] BUILD_CONNECT: bc:0x92ec724 bc->l3id:6160384, nt:1
P[ 1] * IND : Indication [-1] on mISDN/1-u2

P[ 1] --> * IND : -1! (stop indication) pid:4
P[ 1] --> None
[Jul 28 10:39:30] -- <mISDN/1-u2> Playing 'congestion-call' (language 'fr_FR')
P[ 1] Jitterbuffer Underrun. Got 32 of expected 128
P[ 1] Jitterbuffer Underrun. Got 96 of expected 128

[Reaper]

Je vois un appel vers 0618, qui tente de sortir par le trunk IAX et qui échoue, et ton fournisseur rejette.

[TRUST]

oui tout a fait en faite c'est un numéro de portable qui est composé sur un poste téléphonique de l'avaya mais quand il arrive son mon numéro dans le CLI je vois uniquement les 4 premiers chiffres au lieu du numéro complet

je ne sais pass si c'est un probleme de conf chez moi.

donc ensuite l'appel est rejeté car je n'ai pas de route sortante pour des numéros à 4 chiffres

[jean]

j'avais qq chose de similaire sur une passerelle, le boitier était configuré pour un nombre max de digit et/ou numérotation en bloc au lieu de chiffre par chiffre....

[Reaper]

La c'est avaya qui envoie seulement une partie, il est possible que le plan de numérotation est sur 4 chiffres, et donc il envoie 4 pour un appel en interne.

[TRUST]

ben si je branche l'avaya sur un ligne numéris l'appel sort correctement ...

est ce que le drivers Misdn ou autre chose pourrait tronquer le numéro appelé ?

[Reaper]

C'est possible de mémoire,creuse un peu dans la conf, il me semble que il y a une liste de sda accepté vous devez avoir dialplan=0 pour accepter tout.

[TRUST]

[general]
misdn_init=/etc/mISDN.conf
tracefile=/var/log/asterisk/misdn.log
debug=0
append_digits2exten=yes
bridging=yes

[default]
language=fr_FR
nationalprefix=0
internationalprefix=00
rxgain=0
txgain=0
dialplan=0
hdlc=no
pmp_l1_check=yes
echocancel=no
senddtmf=yes
;faxdetect=incoming
faxdetect_timeout=5

[TEports]
context=from-extern
ports=1-8
msns=*

[TRUST]

<mISDNconf>
<module poll="128" debug="0" timer="no">hfcmulti</module>
<module debug="0" options="0">mISDN_dsp</module>
<devnode user="root" group="dialout" mode="0660">mISDN</devnode>
<card type="BN8S0">
<port mode="nt" link="ptmp">1</port>
<port mode="nt" link="ptmp">2</port>
<port mode="nt" link="ptmp">3</port>
<port mode="nt" link="ptmp">4</port>
<port mode="nt" link="ptmp">5</port>
<port mode="nt" link="ptmp">6</port>
<port mode="nt" link="ptmp">7</port>
<port mode="nt" link="ptmp">8</port>
</card>
</mISDNconf>

[Reaper]

dialplan=0 dans le [general]
Recharge re-test ?