[RESOLU] : Config BLF st2030

[Mokha]

Bonjour,

apres 3 jours de recherche et de test selon les différents posts déjà existants je capitule et demande votre aide.

J'essaie de mettre en place la supervision d'appels et le callpickup sur des ST2030

Pour info je suis sous centos-5.7 Asterisk 1.8 et Freepbx 2.9

Je pense que le mieux c'est de me demander au fur et à mesure les fichiers que vous souhaitez voir... parce que là je patauge !!!


Merci

[ffossard]

Il nous faut déjà voir le sip.conf, extensions.conf, et connaitre la version de firmware du téléphone.

[Mokha]

Merci, je désespérais d'avoir une réponse...

Pour les fichiers demandés, c'est un peu plus compliqué que ça car j'utilise Freepbx et du coup j'ai des sip_aditionnal.conf, extensions_aditionnal.conf, etc... en plus des sip.conf extensions.conf, etc...

Bref, je poste les fichiers qui sont je pense les plus intéressant :

sip_additional.conf
----------------------------------------------
[200]
deny=0.0.0.0/0.0.0.0
secret=xxxx
dtmfmode=auto
canreinvite=no
context=from-internal
host=dynamic
trustrpid=yes
sendrpid=no
type=friend
nat=yes
port=5060
qualify=yes
qualifyfreq=60
transport=udp
encryption=no
callgroup=
pickupgroup=
dial=SIP/200
mailbox=200@default
permit=0.0.0.0/0.0.0.0
callerid=device <200>
callcounter=yes
faxdetect=no
cc_monitor_policy=generic

[201]
deny=0.0.0.0/0.0.0.0
secret=xxx
dtmfmode=auto
canreinvite=no
context=from-internal
host=dynamic
trustrpid=yes
sendrpid=no
type=friend
nat=no
port=5060
qualify=yes
qualifyfreq=60
transport=udp
encryption=no
callgroup=21
pickupgroup=21
dial=SIP/201
mailbox=201@default
permit=0.0.0.0/0.0.0.0
callerid=device <201>
callcounter=yes
faxdetect=no
cc_monitor_policy=generic

.
.
.
.
---------------------------------------------

Extensions_aditionnal.conf (j'ai mis que le contexte qui me semble être concerné)
---------------------------------------------------
[ext-local]
include => ext-local-custom
exten => *84200,1,Goto(app-campon-toggle,*84,1)
exten => *84200,hint,ccss:SIP/200
exten => *84201,1,Goto(app-campon-toggle,*84,1)
exten => *84201,hint,ccss:SIP/201
exten => *84202,1,Goto(app-campon-toggle,*84,1)
exten => *84202,hint,ccss:SIP/202
exten => *84203,1,Goto(app-campon-toggle,*84,1)
exten => *84203,hint,ccss:SIP/203
exten => *84204,1,Goto(app-campon-toggle,*84,1)
exten => *84204,hint,ccss:SIP/204
exten => *84205,1,Goto(app-campon-toggle,*84,1)
exten => *84205,hint,ccss:SIP/205
exten => *84206,1,Goto(app-campon-toggle,*84,1)
exten => *84206,hint,ccss:SIP/206
exten => *84207,1,Goto(app-campon-toggle,*84,1)
exten => *84207,hint,ccss:SIP/207
exten => *84208,1,Goto(app-campon-toggle,*84,1)
exten => *84208,hint,ccss:SIP/208
exten => *84209,1,Goto(app-campon-toggle,*84,1)
exten => *84209,hint,ccss:SIP/209
exten => *84210,1,Goto(app-campon-toggle,*84,1)
exten => *84210,hint,ccss:SIP/210
exten => *84211,1,Goto(app-campon-toggle,*84,1)
exten => *84211,hint,ccss:SIP/211
exten => *84212,1,Goto(app-campon-toggle,*84,1)
exten => *84212,hint,ccss:SIP/212
exten => *84220,1,Goto(app-campon-toggle,*84,1)
exten => *84220,hint,ccss:SIP/220
exten => 200,1,ExecIf($[${DB(AMPUSER/200/ringtimer)} > 0]?Set(__RINGTIMER=${DB(AMPUSER/200/ringtimer)}))
exten => 200,n,Macro(exten-vm,200,200,0,0,0)
exten => 200,n,Set(__PICKUPMARK=)
exten => 200,n,Goto(vmret,1)
exten => 200,hint,SIP/200
exten => ${VM_PREFIX}200,1,Macro(vm,200,DIRECTDIAL,${IVR_RE TVM})
exten => ${VM_PREFIX}200,n,Goto(vmret,1)
exten => vmb200,1,Macro(vm,200,BUSY,${IVR_RETVM})
exten => vmb200,n,Goto(vmret,1)
exten => vmu200,1,Macro(vm,200,NOANSWER,${IVR_RETVM})
exten => vmu200,n,Goto(vmret,1)
exten => vms200,1,Macro(vm,200,NOMESSAGE,${IVR_RETVM})
exten => vms200,n,Goto(vmret,1)
exten => Standard,1,Goto(from-internal,200,1)
exten => 201,1,ExecIf($[${DB(AMPUSER/201/ringtimer)} > 0]?Set(__RINGTIMER=${DB(AMPUSER/201/ringtimer)}))
exten => 201,n,Macro(exten-vm,201,201,0,0,0)
exten => 201,n,Set(__PICKUPMARK=)
exten => 201,n,Goto(vmret,1)
exten => 201,hint,SIP/201
exten => ${VM_PREFIX}201,1,Macro(vm,201,DIRECTDIAL,${IVR_RE TVM})
exten => ${VM_PREFIX}201,n,Goto(vmret,1)
exten => vmb201,1,Macro(vm,201,BUSY,${IVR_RETVM})
exten => vmb201,n,Goto(vmret,1)
exten => vmu201,1,Macro(vm,201,NOANSWER,${IVR_RETVM})
exten => vmu201,n,Goto(vmret,1)
exten => vms201,1,Macro(vm,201,NOMESSAGE,${IVR_RETVM})
exten => vms201,n,Goto(vmret,1)
exten => Emmanuelle,1,Goto(from-internal,201,1)
.
.
.
.

-------------------------------------------------------

Le firmware est le V2.77

Pour info, j'ai bien la lumière de ma touche qui clignote vert mais je peux rien faire avec...

Merci

[Mokha]

Bon j'ai résolu en partie le dysfonctionnement... et je me sens un peu bête LOL !

dans mon sip_aditionnal.conf vous verrez que j'ai pas mis de callgroup= pickupgroup= pour le user 200 (celui-ci avec qui je fais mes test). J'ai corrigé et maintenant le BLF (la supervision fonctionne).

LED éteinte quand user OK
LED clignote quand user ring
LED fixe quand user BUSY

Maitenant j'ai un autre souci... le pickup call! impossible d'intercepter un appel via les touche BLF...

some help for me please ???

[ffossard]

Ok c'est déjà ça.
Quand vous appuyez sur une touche clignote, est-ce que le téléphone réagit d'une manière ou d'une autre (erreur, autre action, etc...), ou bien rien ne se passe ?
Quand vous tentez ce pickup, y'a-t-il quelque chose qui s'affiche dans la CLI d'Asterisk ?
Pas évident de diagnostiquer avec Freepbx :/

[Mokha]

alors les symptomes sont étranges...

Scénario 1/ j'appuie sur la touche BLF et je décroche le combiné

Le poste 201 reçois un appel
Le poste 200 voit bien que le poste sonne
J'appuie sur la touche BLF qui clignote sur le poste 200
je décroche le combiné du poste 200
il me lance une numérotation vers le poste 201
Mais j'ai rien dans la CLI rien du tout à part :
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
au moment ou il compose le numéro 201

Scénario 2/ je décroche le combiné et j'appuie sur la touche BLF

Le poste 201 reçois un appel
Le poste 200 voit bien que le poste sonne
je décroche le combiné du poste 200
J'appuie sur la touche BLF qui clignote sur le poste 200
il me lance une numérotation vers le poste 201
Et là j'ai un double appel sur le poste 201 avec la CLI suivante (NB: les postes ici sont 001 et 002):

[Mokha]

IPBX*CLI>
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [095025XXXX@from-trunk:1] NoOp("SIP/Free Aix-0000010f", "Catch-All DID Match - Found 095025XXXX - You probably want a DID for this.") in new stack
-- Executing [095025XXXX@from-trunk:2] Goto("SIP/Free Aix-0000010f", "ext-did,s,1") in new stack
-- Goto (ext-did,s,1)
-- Executing [s@ext-did:1] Set("SIP/Free Aix-0000010f", "__FROM_DID=s") in new stack
-- Executing [s@ext-did:2] Gosub("SIP/Free Aix-0000010f", "app-blacklist-check,s,1") in new stack
-- Executing [s@app-blacklist-check:1] GotoIf("SIP/Free Aix-0000010f", "0?blacklisted") in new stack
-- Executing [s@app-blacklist-check:2] Set("SIP/Free Aix-0000010f", "CALLED_BLACKLIST=1") in new stack
-- Executing [s@app-blacklist-check:3] Return("SIP/Free Aix-0000010f", "") in new stack
-- Executing [s@ext-did:3] ExecIf("SIP/Free Aix-0000010f", "0 ?Set(CALLERID(name)=0637XXXXXX)") in new stack
-- Executing [s@ext-did:4] Ringing("SIP/Free Aix-0000010f", "") in new stack
-- Executing [s@ext-did:5] Set("SIP/Free Aix-0000010f", "__CALLINGPRES_SV=allowed_not_screened") in new stack
-- Executing [s@ext-did:6] Set("SIP/Free Aix-0000010f", "CALLERPRES()=allowed_not_screened") in new stack
-- Executing [s@ext-did:7] Goto("SIP/Free Aix-0000010f", "from-did-direct,001,1") in new stack
-- Goto (from-did-direct,001,1)
-- Executing [001@from-did-direct:1] ExecIf("SIP/Free Aix-0000010f", "0?Set(__RINGTIMER=0)") in new stack
-- Executing [001@from-did-direct:2] Macro("SIP/Free Aix-0000010f", "exten-vm,001,001,0,0,0") in new stack
-- Executing [s@macro-exten-vm:1] Macro("SIP/Free Aix-0000010f", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/Free Aix-0000010f", "AMPUSER=0637XXXXXX") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/Free Aix-0000010f", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/Free Aix-0000010f", "1?Set(REALCALLERIDNUM=0637XXXXXX)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/Free Aix-0000010f", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/Free Aix-0000010f", "AMPUSERCIDNAME=") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/Free Aix-0000010f", "1?report") in new stack
-- Goto (macro-user-callerid,s,12)
-- Executing [s@macro-user-callerid:12] GotoIf("SIP/Free Aix-0000010f", "0?continue") in new stack
-- Executing [s@macro-user-callerid:13] Set("SIP/Free Aix-0000010f", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("SIP/Free Aix-0000010f", "1?continue") in new stack
-- Goto (macro-user-callerid,s,25)
-- Executing [s@macro-user-callerid:25] Set("SIP/Free Aix-0000010f", "CALLERID(number)=0637XXXXXX") in new stack
-- Executing [s@macro-user-callerid:26] Set("SIP/Free Aix-0000010f", "CALLERID(name)=0637XXXXXX") in new stack
-- Executing [s@macro-exten-vm:2] Set("SIP/Free Aix-0000010f", "RingGroupMethod=none") in new stack
-- Executing [s@macro-exten-vm:3] Set("SIP/Free Aix-0000010f", "__EXTTOCALL=001") in new stack
-- Executing [s@macro-exten-vm:4] Set("SIP/Free Aix-0000010f", "__PICKUPMARK=001") in new stack
-- Executing [s@macro-exten-vm:5] Set("SIP/Free Aix-0000010f", "RT=40") in new stack
-- Executing [s@macro-exten-vm:6] Macro("SIP/Free Aix-0000010f", "record-enable,001,IN") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/Free Aix-0000010f", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] ExecIf("SIP/Free Aix-0000010f", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/Free Aix-0000010f", "0?Group:OUT") in new stack
-- Goto (macro-record-enable,s,14)
-- Executing [s@macro-record-enable:14] GotoIf("SIP/Free Aix-0000010f", "1?IN") in new stack
-- Goto (macro-record-enable,s,18)
-- Executing [s@macro-record-enable:18] ExecIf("SIP/Free Aix-0000010f", "1?MacroExit()") in new stack
-- Executing [s@macro-exten-vm:7] Macro("SIP/Free Aix-0000010f", "dial-one,40,tr,001") in new stack
-- Executing [s@macro-dial-one:1] Set("SIP/Free Aix-0000010f", "DEXTEN=001") in new stack
-- Executing [s@macro-dial-one:2] Set("SIP/Free Aix-0000010f", "DIALSTATUS_CW=") in new stack
-- Executing [s@macro-dial-one:3] GosubIf("SIP/Free Aix-0000010f", "0?screen,1") in new stack
-- Executing [s@macro-dial-one:4] GosubIf("SIP/Free Aix-0000010f", "0?cf,1") in new stack
-- Executing [s@macro-dial-one:5] GotoIf("SIP/Free Aix-0000010f", "1?skip1") in new stack
-- Goto (macro-dial-one,s,8)
-- Executing [s@macro-dial-one:8] GotoIf("SIP/Free Aix-0000010f", "0?nodial") in new stack
-- Executing [s@macro-dial-one:9] GotoIf("SIP/Free Aix-0000010f", "0?continue") in new stack
-- Executing [s@macro-dial-one:10] Set("SIP/Free Aix-0000010f", "EXTHASCW=ENABLED") in new stack
-- Executing [s@macro-dial-one:11] GotoIf("SIP/Free Aix-0000010f", "0?next1:cwinusebusy") in new stack
-- Goto (macro-dial-one,s,23)
-- Executing [s@macro-dial-one:23] GotoIf("SIP/Free Aix-0000010f", "1?next3:continue") in new stack
-- Goto (macro-dial-one,s,24)
-- Executing [s@macro-dial-one:24] ExecIf("SIP/Free Aix-0000010f", "0?Set(DIALSTATUS_CW=BUSY)") in new stack
-- Executing [s@macro-dial-one:25] GotoIf("SIP/Free Aix-0000010f", "0?nodial") in new stack
-- Executing [s@macro-dial-one:26] GosubIf("SIP/Free Aix-0000010f", "1?dstring,1:dlocal,1") in new stack
-- Executing [dstring@macro-dial-one:1] Set("SIP/Free Aix-0000010f", "DSTRING=") in new stack
-- Executing [dstring@macro-dial-one:2] Set("SIP/Free Aix-0000010f", "DEVICES=001") in new stack
-- Executing [dstring@macro-dial-one:3] ExecIf("SIP/Free Aix-0000010f", "0?Return()") in new stack
-- Executing [dstring@macro-dial-one:4] ExecIf("SIP/Free Aix-0000010f", "0?Set(DEVICES=01)") in new stack
-- Executing [dstring@macro-dial-one:5] Set("SIP/Free Aix-0000010f", "LOOPCNT=1") in new stack
-- Executing [dstring@macro-dial-one:6] Set("SIP/Free Aix-0000010f", "ITER=1") in new stack
-- Executing [dstring@macro-dial-one:7] Set("SIP/Free Aix-0000010f", "THISDIAL=SIP/001") in new stack
-- Executing [dstring@macro-dial-one:8] GosubIf("SIP/Free Aix-0000010f", "1?zap2dahdi,1") in new stack
-- Executing [zap2dahdi@macro-dial-one:1] ExecIf("SIP/Free Aix-0000010f", "0?Return()") in new stack
-- Executing [zap2dahdi@macro-dial-one:2] Set("SIP/Free Aix-0000010f", "NEWDIAL=") in new stack
-- Executing [zap2dahdi@macro-dial-one:3] Set("SIP/Free Aix-0000010f", "LOOPCNT2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:4] Set("SIP/Free Aix-0000010f", "ITER2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:5] Set("SIP/Free Aix-0000010f", "THISPART2=SIP/001") in new stack
-- Executing [zap2dahdi@macro-dial-one:6] ExecIf("SIP/Free Aix-0000010f", "0?Set(THISPART2=DAHDI/001)") in new stack
-- Executing [zap2dahdi@macro-dial-one:7] Set("SIP/Free Aix-0000010f", "NEWDIAL=SIP/001&") in new stack
-- Executing [zap2dahdi@macro-dial-one:8] Set("SIP/Free Aix-0000010f", "ITER2=2") in new stack
-- Executing [zap2dahdi@macro-dial-one:9] GotoIf("SIP/Free Aix-0000010f", "0?begin2") in new stack
-- Executing [zap2dahdi@macro-dial-one:10] Set("SIP/Free Aix-0000010f", "THISDIAL=SIP/001") in new stack
-- Executing [zap2dahdi@macro-dial-one:11] Return("SIP/Free Aix-0000010f", "") in new stack
-- Executing [dstring@macro-dial-one:9] Set("SIP/Free Aix-0000010f", "DSTRING=SIP/001&") in new stack
-- Executing [dstring@macro-dial-one:10] Set("SIP/Free Aix-0000010f", "ITER=2") in new stack
-- Executing [dstring@macro-dial-one:11] GotoIf("SIP/Free Aix-0000010f", "0?begin") in new stack
-- Executing [dstring@macro-dial-one:12] Set("SIP/Free Aix-0000010f", "DSTRING=SIP/001") in new stack
-- Executing [dstring@macro-dial-one:13] Return("SIP/Free Aix-0000010f", "") in new stack
-- Executing [s@macro-dial-one:27] GotoIf("SIP/Free Aix-0000010f", "0?nodial") in new stack
-- Executing [s@macro-dial-one:28] GotoIf("SIP/Free Aix-0000010f", "1?skiptrace") in new stack
-- Goto (macro-dial-one,s,30)
-- Executing [s@macro-dial-one:30] Set("SIP/Free Aix-0000010f", "D_OPTIONS=tr") in new stack
-- Executing [s@macro-dial-one:31] ExecIf("SIP/Free Aix-0000010f", "0?SIPAddHeader(Alert-Info: )") in new stack
-- Executing [s@macro-dial-one:32] ExecIf("SIP/Free Aix-0000010f", "0?SIPAddHeader()") in new stack
-- Executing [s@macro-dial-one:33] ExecIf("SIP/Free Aix-0000010f", "0?Set(CHANNEL(musicclass)=)") in new stack
-- Executing [s@macro-dial-one:34] GosubIf("SIP/Free Aix-0000010f", "0?qwait,1") in new stack
-- Executing [s@macro-dial-one:35] Set("SIP/Free Aix-0000010f", "__CWIGNORE=") in new stack
-- Executing [s@macro-dial-one:36] Set("SIP/Free Aix-0000010f", "__KEEPCID=TRUE") in new stack
-- Executing [s@macro-dial-one:37] GotoIf("SIP/Free Aix-0000010f", "0?usegoto,1") in new stack
-- Executing [s@macro-dial-one:38] Dial("SIP/Free Aix-0000010f", "SIP/001,40,tr") in new stack

[Mokha]

== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
== Extension Changed 001[ext-local] new state Ringing for Notify User 002
-- Called 001
-- SIP/001-00000110 is ringing
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [001@from-internal:1] ExecIf("SIP/002-00000111", "0?Set(__RINGTIMER=0)") in new stack
-- Executing [001@from-internal:2] Macro("SIP/002-00000111", "exten-vm,001,001,0,0,0") in new stack
-- Executing [s@macro-exten-vm:1] Macro("SIP/002-00000111", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/002-00000111", "AMPUSER=002") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/002-00000111", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/002-00000111", "1?Set(REALCALLERIDNUM=002)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/002-00000111", "AMPUSER=002") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/002-00000111", "AMPUSERCIDNAME=Christophe") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/002-00000111", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/002-00000111", "AMPUSERCID=002") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/002-00000111", "CALLERID(all)="Christophe" <002>") in new stack
-- Executing [s@macro-user-callerid:9] GotoIf("SIP/002-00000111", "0?limit") in new stack
-- Executing [s@macro-user-callerid:10] ExecIf("SIP/002-00000111", "0?Set(GROUP(concurrency_limit)=002)") in new stack
-- Executing [s@macro-user-callerid:11] ExecIf("SIP/002-00000111", "1?Set(CHANNEL(language)=fr)") in new stack
-- Executing [s@macro-user-callerid:12] GotoIf("SIP/002-00000111", "0?continue") in new stack
-- Executing [s@macro-user-callerid:13] Set("SIP/002-00000111", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("SIP/002-00000111", "1?continue") in new stack
-- Goto (macro-user-callerid,s,25)
-- Executing [s@macro-user-callerid:25] Set("SIP/002-00000111", "CALLERID(number)=002") in new stack
-- Executing [s@macro-user-callerid:26] Set("SIP/002-00000111", "CALLERID(name)=Christophe") in new stack
-- Executing [s@macro-exten-vm:2] Set("SIP/002-00000111", "RingGroupMethod=none") in new stack
-- Executing [s@macro-exten-vm:3] Set("SIP/002-00000111", "__EXTTOCALL=001") in new stack
-- Executing [s@macro-exten-vm:4] Set("SIP/002-00000111", "__PICKUPMARK=001") in new stack
-- Executing [s@macro-exten-vm:5] Set("SIP/002-00000111", "RT=40") in new stack
-- Executing [s@macro-exten-vm:6] Macro("SIP/002-00000111", "record-enable,001,IN") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/002-00000111", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] ExecIf("SIP/002-00000111", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/002-00000111", "0?Group:OUT") in new stack
-- Goto (macro-record-enable,s,14)
-- Executing [s@macro-record-enable:14] GotoIf("SIP/002-00000111", "1?IN") in new stack
-- Goto (macro-record-enable,s,18)
-- Executing [s@macro-record-enable:18] ExecIf("SIP/002-00000111", "1?MacroExit()") in new stack
-- Executing [s@macro-exten-vm:7] Macro("SIP/002-00000111", "dial-one,40,tr,001") in new stack
-- Executing [s@macro-dial-one:1] Set("SIP/002-00000111", "DEXTEN=001") in new stack
-- Executing [s@macro-dial-one:2] Set("SIP/002-00000111", "DIALSTATUS_CW=") in new stack
-- Executing [s@macro-dial-one:3] GosubIf("SIP/002-00000111", "0?screen,1") in new stack
-- Executing [s@macro-dial-one:4] GosubIf("SIP/002-00000111", "0?cf,1") in new stack
-- Executing [s@macro-dial-one:5] GotoIf("SIP/002-00000111", "1?skip1") in new stack
-- Goto (macro-dial-one,s,8)
-- Executing [s@macro-dial-one:8] GotoIf("SIP/002-00000111", "0?nodial") in new stack
-- Executing [s@macro-dial-one:9] GotoIf("SIP/002-00000111", "0?continue") in new stack
-- Executing [s@macro-dial-one:10] Set("SIP/002-00000111", "EXTHASCW=ENABLED") in new stack
-- Executing [s@macro-dial-one:11] GotoIf("SIP/002-00000111", "0?next1:cwinusebusy") in new stack
-- Goto (macro-dial-one,s,23)
-- Executing [s@macro-dial-one:23] GotoIf("SIP/002-00000111", "1?next3:continue") in new stack
-- Goto (macro-dial-one,s,24)
-- Executing [s@macro-dial-one:24] ExecIf("SIP/002-00000111", "1?Set(DIALSTATUS_CW=BUSY)") in new stack
-- Executing [s@macro-dial-one:25] GotoIf("SIP/002-00000111", "0?nodial") in new stack
-- Executing [s@macro-dial-one:26] GosubIf("SIP/002-00000111", "1?dstring,1:dlocal,1") in new stack
-- Executing [dstring@macro-dial-one:1] Set("SIP/002-00000111", "DSTRING=") in new stack
-- Executing [dstring@macro-dial-one:2] Set("SIP/002-00000111", "DEVICES=001") in new stack
-- Executing [dstring@macro-dial-one:3] ExecIf("SIP/002-00000111", "0?Return()") in new stack
-- Executing [dstring@macro-dial-one:4] ExecIf("SIP/002-00000111", "0?Set(DEVICES=01)") in new stack
-- Executing [dstring@macro-dial-one:5] Set("SIP/002-00000111", "LOOPCNT=1") in new stack
-- Executing [dstring@macro-dial-one:6] Set("SIP/002-00000111", "ITER=1") in new stack
-- Executing [dstring@macro-dial-one:7] Set("SIP/002-00000111", "THISDIAL=SIP/001") in new stack
-- Executing [dstring@macro-dial-one:8] GosubIf("SIP/002-00000111", "1?zap2dahdi,1") in new stack
-- Executing [zap2dahdi@macro-dial-one:1] ExecIf("SIP/002-00000111", "0?Return()") in new stack
-- Executing [zap2dahdi@macro-dial-one:2] Set("SIP/002-00000111", "NEWDIAL=") in new stack
-- Executing [zap2dahdi@macro-dial-one:3] Set("SIP/002-00000111", "LOOPCNT2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:4] Set("SIP/002-00000111", "ITER2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:5] Set("SIP/002-00000111", "THISPART2=SIP/001") in new stack
-- Executing [zap2dahdi@macro-dial-one:6] ExecIf("SIP/002-00000111", "0?Set(THISPART2=DAHDI/001)") in new stack
-- Executing [zap2dahdi@macro-dial-one:7] Set("SIP/002-00000111", "NEWDIAL=SIP/001&") in new stack
-- Executing [zap2dahdi@macro-dial-one:8] Set("SIP/002-00000111", "ITER2=2") in new stack
-- Executing [zap2dahdi@macro-dial-one:9] GotoIf("SIP/002-00000111", "0?begin2") in new stack
-- Executing [zap2dahdi@macro-dial-one:10] Set("SIP/002-00000111", "THISDIAL=SIP/001") in new stack
-- Executing [zap2dahdi@macro-dial-one:11] Return("SIP/002-00000111", "") in new stack
-- Executing [dstring@macro-dial-one:9] Set("SIP/002-00000111", "DSTRING=SIP/001&") in new stack
-- Executing [dstring@macro-dial-one:10] Set("SIP/002-00000111", "ITER=2") in new stack
-- Executing [dstring@macro-dial-one:11] GotoIf("SIP/002-00000111", "0?begin") in new stack
-- Executing [dstring@macro-dial-one:12] Set("SIP/002-00000111", "DSTRING=SIP/001") in new stack
-- Executing [dstring@macro-dial-one:13] Return("SIP/002-00000111", "") in new stack
-- Executing [s@macro-dial-one:27] GotoIf("SIP/002-00000111", "0?nodial") in new stack
-- Executing [s@macro-dial-one:28] GotoIf("SIP/002-00000111", "1?skiptrace") in new stack
-- Goto (macro-dial-one,s,30)
-- Executing [s@macro-dial-one:30] Set("SIP/002-00000111", "D_OPTIONS=tr") in new stack
-- Executing [s@macro-dial-one:31] ExecIf("SIP/002-00000111", "0?SIPAddHeader(Alert-Info: )") in new stack
-- Executing [s@macro-dial-one:32] ExecIf("SIP/002-00000111", "0?SIPAddHeader()") in new stack
-- Executing [s@macro-dial-one:33] ExecIf("SIP/002-00000111", "0?Set(CHANNEL(musicclass)=)") in new stack
-- Executing [s@macro-dial-one:34] GosubIf("SIP/002-00000111", "0?qwait,1") in new stack
-- Executing [s@macro-dial-one:35] Set("SIP/002-00000111", "__CWIGNORE=") in new stack
-- Executing [s@macro-dial-one:36] Set("SIP/002-00000111", "__KEEPCID=TRUE") in new stack
-- Executing [s@macro-dial-one:37] GotoIf("SIP/002-00000111", "0?usegoto,1") in new stack
-- Executing [s@macro-dial-one:38] Dial("SIP/002-00000111", "SIP/001,40,tr") in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Called 001
-- SIP/001-00000112 is ringing
-- Refreshing DNS lookups.
== Spawn extension (macro-dial-one, s, 38) exited non-zero on 'SIP/002-00000111' in macro 'dial-one'
== Spawn extension (macro-exten-vm, s, 7) exited non-zero on 'SIP/002-00000111' in macro 'exten-vm'
== Spawn extension (from-internal, 001, 2) exited non-zero on 'SIP/002-00000111'
-- Executing [h@from-internal:1] Hangup("SIP/002-00000111", "") in new stack
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/002-00000111'
== Spawn extension (macro-dial-one, s, 38) exited non-zero on 'SIP/Free Aix-0000010f' in macro 'dial-one'
== Spawn extension (macro-exten-vm, s, 7) exited non-zero on 'SIP/Free Aix-0000010f' in macro 'exten-vm'
== Spawn extension (from-did-direct, 001, 2) exited non-zero on 'SIP/Free Aix-0000010f'
-- Executing [h@from-did-direct:1] Macro("SIP/Free Aix-0000010f", "hangupcall,") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/Free Aix-0000010f", "1?theend") in new stack
-- Goto (macro-hangupcall,s,3)
-- Executing [s@macro-hangupcall:3] Hangup("SIP/Free Aix-0000010f", "") in new stack
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/Free Aix-0000010f' in macro 'hangupcall'
== Spawn extension (from-did-direct, h, 1) exited non-zero on 'SIP/Free Aix-0000010f'
== Extension Changed 001[ext-local] new state Idle for Notify User 002
IPBX*CLI>

[Mokha]

info complémentaire:

Le pickup fonctionne nikel quand je le fais moi même en numérotant --> *8 ou **+n°de poste

[yold]

C'est un bug qui est apparu sur les firmwares récents des ST2030 et ST2022.
Il faut d'abord appuyer sur la touche puis décrocher.
Sinon, cela effectue un double appel.