voici le résultat avecCode:pri set debug on span 1Code:< Protocol Discriminator: Q.931 (8) len=36 < TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent from originator) < Message Type: SETUP (5) < [a1] < Sending Complete (len= 1) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < User information layer 1: A-Law (35) < [18 03 a9 83 8a] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 Exclusive Dchan: 0 < ChanSel: As indicated in following octets < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 10 Type: CPE] < [6c 0c 01 83 30 37 39 37 39 34 31 32 33 38] < Calling Number (len=14) [ Ext: 0 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation allowed of network provided number (3) '0797941238' ] < [70 04 81 31 32 32] < Called Number (len= 6) [ Ext: 1 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '122' ] -- Making new call for cref 2107 Received message for call 0x2aaac8768ab0 on 0x1ef475b0 TEI/SAPI 0/0, call->pri is 0x1ef475b0 TEI/SAPI 0/0 -- Processing Q.931 Call Setup -- Processing IE 161 (cs0, Sending Complete) -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 112 (cs0, Called Party Number) q931.c:6966 post_handle_q931_message: Call 2107 enters state 6 (Call Present). Hold state: Idle q931.c:4594 q931_call_proceeding: Call 2107 enters state 9 (Incoming Call Proceeding). Hold state: Idle > DL-DATA request > Protocol Discriminator: Q.931 (8) len=10 > TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator) > Message Type: CALL PROCEEDING (2) TEI=0 Transmitting N(S)=16, window is open V(A)=16 K=7




Répondre avec citation