Changement canal D sur TE 121 + freepbx

**Nightwars** · 11/12/2011, 19h24

voici le résultat avec

Code:

pri set debug on span 1

Code:

< Protocol Discriminator: Q.931 (8)  len=36
< TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent from originator)
< Message Type: SETUP (5)
< [a1]
< Sending Complete (len= 1)
< [04 03 80 90 a3]
< Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer capability: Speech (0)
<                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
<                                User information layer 1: A-Law (35)
< [18 03 a9 83 8a]
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)  Spare: 0  Exclusive  Dchan: 0
<                       ChanSel: As indicated in following octets
<                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
<                       Ext: 1  Channel: 10 Type: CPE]
< [6c 0c 01 83 30 37 39 37 39 34 31 32 33 38]
< Calling Number (len=14) [ Ext: 0  TON: Unknown Number Type (0)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
<                           Presentation: Presentation allowed of network provided number (3)  '0797941238' ]
< [70 04 81 31 32 32]
< Called Number (len= 6) [ Ext: 1  TON: Unknown Number Type (0)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)  '122' ]
-- Making new call for cref 2107
Received message for call 0x2aaac8768ab0 on 0x1ef475b0 TEI/SAPI 0/0, call->pri is 0x1ef475b0 TEI/SAPI 0/0
-- Processing Q.931 Call Setup
-- Processing IE 161 (cs0, Sending Complete)
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
q931.c:6966 post_handle_q931_message: Call 2107 enters state 6 (Call Present).  Hold state: Idle
q931.c:4594 q931_call_proceeding: Call 2107 enters state 9 (Incoming Call Proceeding).  Hold state: Idle

> DL-DATA request
> Protocol Discriminator: Q.931 (8)  len=10
> TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
> Message Type: CALL PROCEEDING (2)
TEI=0 Transmitting N(S)=16, window is open V(A)=16 K=7

**Nightwars** · 11/12/2011, 19h25

Code:

> Protocol Discriminator: Q.931 (8)  len=10
> TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
> Message Type: CALL PROCEEDING (2)
> [18 03 a9 83 8a]
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)  Spare: 0  Exclusive  Dchan: 0
>                       ChanSel: As indicated in following octets
>                       Ext: 1  Coding: 0  Number Specified  Channel Type: 3
>                       Ext: 1  Channel: 10 Type: CPE]
    -- Accepting call from '0797941238' to '122' on channel 0/10, span 1
    -- Executing [122@from-pstn:1] Set("DAHDI/10-1", "__FROM_DID=122") in new stack
    -- Executing [122@from-pstn:2] Gosub("DAHDI/10-1", "app-blacklist-check,s,1") in new stack
    -- Executing [s@app-blacklist-check:1] GotoIf("DAHDI/10-1", "0?blacklisted") in new stack
    -- Executing [s@app-blacklist-check:2] Set("DAHDI/10-1", "CALLED_BLACKLIST=1") in new stack
    -- Executing [s@app-blacklist-check:3] Return("DAHDI/10-1", "") in new stack
    -- Executing [122@from-pstn:3] ExecIf("DAHDI/10-1", "1 ?Set(CALLERID(name)=0797941238)") in new stack
    -- Executing [122@from-pstn:4] Set("DAHDI/10-1", "__CALLINGPRES_SV=allowed") in new stack
    -- Executing [122@from-pstn:5] Set("DAHDI/10-1", "CALLERPRES()=allowed_not_screened") in new stack
    -- Executing [122@from-pstn:6] Goto("DAHDI/10-1", "from-did-direct,122,1") in new stack
    -- Goto (from-did-direct,122,1)
    -- Executing [122@from-did-direct:1] ExecIf("DAHDI/10-1", "0?Set(__RINGTIMER=0)") in new stack
    -- Executing [122@from-did-direct:2] Macro("DAHDI/10-1", "exten-vm,novm,122,0,0,0") in new stack
    -- Executing [s@macro-exten-vm:1] Macro("DAHDI/10-1", "user-callerid,") in new stack
    -- Executing [s@macro-user-callerid:1] Set("DAHDI/10-1", "AMPUSER=0797941238") in new stack
    -- Executing [s@macro-user-callerid:2] GotoIf("DAHDI/10-1", "0?report") in new stack
    -- Executing [s@macro-user-callerid:3] ExecIf("DAHDI/10-1", "1?Set(REALCALLERIDNUM=0797941238)") in new stack
    -- Executing [s@macro-user-callerid:4] Set("DAHDI/10-1", "AMPUSER=") in new stack
    -- Executing [s@macro-user-callerid:5] Set("DAHDI/10-1", "AMPUSERCIDNAME=") in new stack
    -- Executing [s@macro-user-callerid:6] GotoIf("DAHDI/10-1", "1?report") in new stack
    -- Goto (macro-user-callerid,s,12)
    -- Executing [s@macro-user-callerid:12] GotoIf("DAHDI/10-1", "0?continue") in new stack
    -- Executing [s@macro-user-callerid:13] Set("DAHDI/10-1", "__TTL=64") in new stack
    -- Executing [s@macro-user-callerid:14] GotoIf("DAHDI/10-1", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,25)
    -- Executing [s@macro-user-callerid:25] Set("DAHDI/10-1", "CALLERID(number)=0797941238") in new stack
    -- Executing [s@macro-user-callerid:26] Set("DAHDI/10-1", "CALLERID(name)=0797941238") in new stack
    -- Executing [s@macro-exten-vm:2] Set("DAHDI/10-1", "RingGroupMethod=none") in new stack
    -- Executing [s@macro-exten-vm:3] Set("DAHDI/10-1", "__EXTTOCALL=122") in new stack
    -- Executing [s@macro-exten-vm:4] Set("DAHDI/10-1", "__PICKUPMARK=122") in new stack
    -- Executing [s@macro-exten-vm:5] Set("DAHDI/10-1", "RT=") in new stack
    -- Executing [s@macro-exten-vm:6] Macro("DAHDI/10-1", "record-enable,122,IN") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("DAHDI/10-1", "1?check") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] ExecIf("DAHDI/10-1", "0?MacroExit()") in new stack
    -- Executing [s@macro-record-enable:5] GotoIf("DAHDI/10-1", "0?Group:OUT") in new stack
    -- Goto (macro-record-enable,s,14)
    -- Executing [s@macro-record-enable:14] GotoIf("DAHDI/10-1", "1?IN") in new stack
    -- Goto (macro-record-enable,s,18)
    -- Executing [s@macro-record-enable:18] ExecIf("DAHDI/10-1", "1?MacroExit()") in new stack
    -- Executing [s@macro-exten-vm:7] Macro("DAHDI/10-1", "dial-one,,tr,122") in new stack
    -- Executing [s@macro-dial-one:1] Set("DAHDI/10-1", "DEXTEN=122") in new stack
    -- Executing [s@macro-dial-one:2] Set("DAHDI/10-1", "DIALSTATUS_CW=") in new stack
    -- Executing [s@macro-dial-one:3] GosubIf("DAHDI/10-1", "0?screen,1") in new stack
    -- Executing [s@macro-dial-one:4] GosubIf("DAHDI/10-1", "0?cf,1") in new stack
    -- Executing [s@macro-dial-one:5] GotoIf("DAHDI/10-1", "1?skip1") in new stack
    -- Goto (macro-dial-one,s,8)

**Nightwars** · 11/12/2011, 19h25

Code:

    -- Executing [s@macro-dial-one:8] GotoIf("DAHDI/10-1", "0?nodial") in new stack
    -- Executing [s@macro-dial-one:9] GotoIf("DAHDI/10-1", "0?continue") in new stack
    -- Executing [s@macro-dial-one:10] Set("DAHDI/10-1", "EXTHASCW=ENABLED") in new stack
    -- Executing [s@macro-dial-one:11] GotoIf("DAHDI/10-1", "0?next1:cwinusebusy") in new stack
    -- Goto (macro-dial-one,s,23)
    -- Executing [s@macro-dial-one:23] GotoIf("DAHDI/10-1", "1?next3:continue") in new stack
    -- Goto (macro-dial-one,s,24)
    -- Executing [s@macro-dial-one:24] ExecIf("DAHDI/10-1", "0?Set(DIALSTATUS_CW=BUSY)") in new stack
    -- Executing [s@macro-dial-one:25] GotoIf("DAHDI/10-1", "0?nodial") in new stack
    -- Executing [s@macro-dial-one:26] GosubIf("DAHDI/10-1", "1?dstring,1:dlocal,1") in new stack
    -- Executing [dstring@macro-dial-one:1] Set("DAHDI/10-1", "DSTRING=") in new stack
    -- Executing [dstring@macro-dial-one:2] Set("DAHDI/10-1", "DEVICES=122") in new stack
    -- Executing [dstring@macro-dial-one:3] ExecIf("DAHDI/10-1", "0?Return()") in new stack
    -- Executing [dstring@macro-dial-one:4] ExecIf("DAHDI/10-1", "0?Set(DEVICES=22)") in new stack
    -- Executing [dstring@macro-dial-one:5] Set("DAHDI/10-1", "LOOPCNT=1") in new stack
    -- Executing [dstring@macro-dial-one:6] Set("DAHDI/10-1", "ITER=1") in new stack
    -- Executing [dstring@macro-dial-one:7] Set("DAHDI/10-1", "THISDIAL=SIP/122") in new stack
    -- Executing [dstring@macro-dial-one:8] GosubIf("DAHDI/10-1", "1?zap2dahdi,1") in new stack
    -- Executing [zap2dahdi@macro-dial-one:1] ExecIf("DAHDI/10-1", "0?Return()") in new stack
    -- Executing [zap2dahdi@macro-dial-one:2] Set("DAHDI/10-1", "NEWDIAL=") in new stack
    -- Executing [zap2dahdi@macro-dial-one:3] Set("DAHDI/10-1", "LOOPCNT2=1") in new stack
    -- Executing [zap2dahdi@macro-dial-one:4] Set("DAHDI/10-1", "ITER2=1") in new stack
    -- Executing [zap2dahdi@macro-dial-one:5] Set("DAHDI/10-1", "THISPART2=SIP/122") in new stack
    -- Executing [zap2dahdi@macro-dial-one:6] ExecIf("DAHDI/10-1", "0?Set(THISPART2=DAHDI/122)") in new stack
    -- Executing [zap2dahdi@macro-dial-one:7] Set("DAHDI/10-1", "NEWDIAL=SIP/122&") in new stack
    -- Executing [zap2dahdi@macro-dial-one:8] Set("DAHDI/10-1", "ITER2=2") in new stack
    -- Executing [zap2dahdi@macro-dial-one:9] GotoIf("DAHDI/10-1", "0?begin2") in new stack
    -- Executing [zap2dahdi@macro-dial-one:10] Set("DAHDI/10-1", "THISDIAL=SIP/122") in new stack
    -- Executing [zap2dahdi@macro-dial-one:11] Return("DAHDI/10-1", "") in new stack
    -- Executing [dstring@macro-dial-one:9] Set("DAHDI/10-1", "DSTRING=SIP/122&") in new stack
    -- Executing [dstring@macro-dial-one:10] Set("DAHDI/10-1", "ITER=2") in new stack
    -- Executing [dstring@macro-dial-one:11] GotoIf("DAHDI/10-1", "0?begin") in new stack
    -- Executing [dstring@macro-dial-one:12] Set("DAHDI/10-1", "DSTRING=SIP/122") in new stack
    -- Executing [dstring@macro-dial-one:13] Return("DAHDI/10-1", "") in new stack
    -- Executing [s@macro-dial-one:27] GotoIf("DAHDI/10-1", "0?nodial") in new stack
    -- Executing [s@macro-dial-one:28] GotoIf("DAHDI/10-1", "1?skiptrace") in new stack
    -- Goto (macro-dial-one,s,30)
    -- Executing [s@macro-dial-one:30] Set("DAHDI/10-1", "D_OPTIONS=tr") in new stack
    -- Executing [s@macro-dial-one:31] ExecIf("DAHDI/10-1", "0?SIPAddHeader(Alert-Info: )") in new stack
    -- Executing [s@macro-dial-one:32] ExecIf("DAHDI/10-1", "0?SIPAddHeader()") in new stack
    -- Executing [s@macro-dial-one:33] ExecIf("DAHDI/10-1", "0?Set(CHANNEL(musicclass)=)") in new stack
    -- Executing [s@macro-dial-one:34] GosubIf("DAHDI/10-1", "0?qwait,1") in new stack
    -- Executing [s@macro-dial-one:35] Set("DAHDI/10-1", "__CWIGNORE=") in new stack
    -- Executing [s@macro-dial-one:36] Set("DAHDI/10-1", "__KEEPCID=TRUE") in new stack
    -- Executing [s@macro-dial-one:37] GotoIf("DAHDI/10-1", "0?usegoto,1") in new stack
    -- Executing [s@macro-dial-one:38] Dial("DAHDI/10-1", "SIP/122,,tr") in new stack

**Nightwars** · 11/12/2011, 19h26

Code:

 == Using SIP RTP TOS bits 184
  == Using SIP RTP CoS mark 5
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [s@macro-dial-one:39] ExecIf("DAHDI/10-1", "0?Set(DIALSTATUS=)") in new stack
    -- Executing [s@macro-dial-one:40] GosubIf("DAHDI/10-1", "0?s-CHANUNAVAIL,1") in new stack
    -- Executing [s@macro-dial-one:41] MacroExit("DAHDI/10-1", "") in new stack
    -- Executing [s@macro-exten-vm:8] GotoIf("DAHDI/10-1", "0?exit") in new stack
    -- Executing [s@macro-exten-vm:9] Set("DAHDI/10-1", "SV_DIALSTATUS=CHANUNAVAIL") in new stack
    -- Executing [s@macro-exten-vm:10] GosubIf("DAHDI/10-1", "0?docfu,1") in new stack
    -- Executing [s@macro-exten-vm:11] GosubIf("DAHDI/10-1", "0?docfb,1") in new stack
    -- Executing [s@macro-exten-vm:12] Set("DAHDI/10-1", "DIALSTATUS=CHANUNAVAIL") in new stack
    -- Executing [s@macro-exten-vm:13] ExecIf("DAHDI/10-1", "0?MacroExit()") in new stack
    -- Executing [s@macro-exten-vm:14] GotoIf("DAHDI/10-1", "1?s-CHANUNAVAIL,1") in new stack
    -- Goto (macro-exten-vm,s-CHANUNAVAIL,1)
    -- Executing [s-CHANUNAVAIL@macro-exten-vm:1] GotoIf("DAHDI/10-1", "0?exit,1") in new stack
    -- Executing [s-CHANUNAVAIL@macro-exten-vm:2] PlayTones("DAHDI/10-1", "congestion") in new stack
    -- Executing [s-CHANUNAVAIL@macro-exten-vm:3] Congestion("DAHDI/10-1", "10") in new stack

> DL-DATA request
> Protocol Discriminator: Q.931 (8)  len=13
> TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
> Message Type: PROGRESS (3)
TEI=0 Transmitting N(S)=17, window is open V(A)=16 K=7

> Protocol Discriminator: Q.931 (8)  len=13
> TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
> Message Type: PROGRESS (3)
> [08 02 81 94]
> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  Location: Private network serving the local user (1)
>                  Ext: 1  Cause: Unknown (20), class = Normal Event (1) ]
> [1e 02 81 88]
> Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  0: 0  Location: Private network serving the local user (1)
>                               Ext: 1  Progress Description: Inband information or appropriate pattern now available. (8) ]
    -- Registered IAX2 '110' (AUTHENTICATED) at 127.0.0.1:45909
    -- Registered IAX2 '112' (AUTHENTICATED) at 127.0.0.1:39399
    -- Registered IAX2 '117' (AUTHENTICATED) at 127.0.0.1:44868
    -- Registered IAX2 '115' (AUTHENTICATED) at 127.0.0.1:57559
    -- Registered IAX2 '113' (AUTHENTICATED) at 127.0.0.1:59283
  == Spawn extension (macro-exten-vm, s-CHANUNAVAIL, 3) exited non-zero on 'DAHDI/10-1' in macro 'exten-vm'
  == Spawn extension (from-did-direct, 122, 2) exited non-zero on 'DAHDI/10-1'
    -- Executing [h@from-did-direct:1] Macro("DAHDI/10-1", "hangupcall,") in new stack
    -- Executing [s@macro-hangupcall:1] GotoIf("DAHDI/10-1", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,3)
    -- Executing [s@macro-hangupcall:3] Hangup("DAHDI/10-1", "") in new stack
  == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'DAHDI/10-1' in macro 'hangupcall'
  == Spawn extension (from-did-direct, h, 1) exited non-zero on 'DAHDI/10-1'
q931_hangup: other hangup
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Incoming Call Proceeding, peerstate Outgoing Call Proceeding, hold-state Idle
q931.c:4845 q931_disconnect: Call 2107 enters state 11 (Disconnect Request).  Hold state: Idle

**Nightwars** · 11/12/2011, 19h26

Code:

 
> DL-DATA request
> Protocol Discriminator: Q.931 (8)  len=9
> TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
> Message Type: DISCONNECT (69)
TEI=0 Transmitting N(S)=18, window is open V(A)=18 K=7

> Protocol Discriminator: Q.931 (8)  len=9
> TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
> Message Type: DISCONNECT (69)
> [08 02 81 94]
> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  Location: Private network serving the local user (1)
>                  Ext: 1  Cause: Unknown (20), class = Normal Event (1) ]
    -- Hungup 'DAHDI/10-1'

< Protocol Discriminator: Q.931 (8)  len=5
< TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent from originator)
< Message Type: RELEASE (77)
Received message for call 0x2aaac8768ab0 on 0x1ef475b0 TEI/SAPI 0/0, call->pri is 0x1ef475b0 TEI/SAPI 0/0
q931.c:7237 post_handle_q931_message: Call 2107 enters state 0 (Null).  Hold state: Idle
q931_hangup: other hangup
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release Request, hold-state Idle

> DL-DATA request
> Protocol Discriminator: Q.931 (8)  len=9
> TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
> Message Type: RELEASE COMPLETE (90)
TEI=0 Transmitting N(S)=19, window is open V(A)=19 K=7

> Protocol Discriminator: Q.931 (8)  len=9
> TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
> Message Type: RELEASE COMPLETE (90)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  Location: Private network serving the local user (1)
>                  Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1) ]
q931_hangup: other hangup
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null, hold-state Idle
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null, hold-state Idle

**Reaper** · 11/12/2011, 19h27

et Utilise Pastebin pour les logs

Discussion: Changement canal D sur TE 121 + freepbx

Outils de la discussion

Rechercher dans la discussion

Affichage

Vue hybride

Règles de messages