Affichage des résultats 1 à 10 sur 22

Discussion: Changement canal D sur TE 121 + freepbx

Vue hybride

Message précédent Message précédent   Message suivant Message suivant
  1. #1
    Membre
    Date d'inscription
    mars 2011
    Localisation
    Genève Suisse
    Messages
    73
    Downloads
    0
    Uploads
    0
    Code:
     == Using SIP RTP TOS bits 184
      == Using SIP RTP CoS mark 5
      == Everyone is busy/congested at this time (1:0/0/1)
        -- Executing [s@macro-dial-one:39] ExecIf("DAHDI/10-1", "0?Set(DIALSTATUS=)") in new stack
        -- Executing [s@macro-dial-one:40] GosubIf("DAHDI/10-1", "0?s-CHANUNAVAIL,1") in new stack
        -- Executing [s@macro-dial-one:41] MacroExit("DAHDI/10-1", "") in new stack
        -- Executing [s@macro-exten-vm:8] GotoIf("DAHDI/10-1", "0?exit") in new stack
        -- Executing [s@macro-exten-vm:9] Set("DAHDI/10-1", "SV_DIALSTATUS=CHANUNAVAIL") in new stack
        -- Executing [s@macro-exten-vm:10] GosubIf("DAHDI/10-1", "0?docfu,1") in new stack
        -- Executing [s@macro-exten-vm:11] GosubIf("DAHDI/10-1", "0?docfb,1") in new stack
        -- Executing [s@macro-exten-vm:12] Set("DAHDI/10-1", "DIALSTATUS=CHANUNAVAIL") in new stack
        -- Executing [s@macro-exten-vm:13] ExecIf("DAHDI/10-1", "0?MacroExit()") in new stack
        -- Executing [s@macro-exten-vm:14] GotoIf("DAHDI/10-1", "1?s-CHANUNAVAIL,1") in new stack
        -- Goto (macro-exten-vm,s-CHANUNAVAIL,1)
        -- Executing [s-CHANUNAVAIL@macro-exten-vm:1] GotoIf("DAHDI/10-1", "0?exit,1") in new stack
        -- Executing [s-CHANUNAVAIL@macro-exten-vm:2] PlayTones("DAHDI/10-1", "congestion") in new stack
        -- Executing [s-CHANUNAVAIL@macro-exten-vm:3] Congestion("DAHDI/10-1", "10") in new stack
    
    > DL-DATA request
    > Protocol Discriminator: Q.931 (8)  len=13
    > TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
    > Message Type: PROGRESS (3)
    TEI=0 Transmitting N(S)=17, window is open V(A)=16 K=7
    
    > Protocol Discriminator: Q.931 (8)  len=13
    > TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
    > Message Type: PROGRESS (3)
    > [08 02 81 94]
    > Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  Location: Private network serving the local user (1)
    >                  Ext: 1  Cause: Unknown (20), class = Normal Event (1) ]
    > [1e 02 81 88]
    > Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  0: 0  Location: Private network serving the local user (1)
    >                               Ext: 1  Progress Description: Inband information or appropriate pattern now available. (8) ]
        -- Registered IAX2 '110' (AUTHENTICATED) at 127.0.0.1:45909
        -- Registered IAX2 '112' (AUTHENTICATED) at 127.0.0.1:39399
        -- Registered IAX2 '117' (AUTHENTICATED) at 127.0.0.1:44868
        -- Registered IAX2 '115' (AUTHENTICATED) at 127.0.0.1:57559
        -- Registered IAX2 '113' (AUTHENTICATED) at 127.0.0.1:59283
      == Spawn extension (macro-exten-vm, s-CHANUNAVAIL, 3) exited non-zero on 'DAHDI/10-1' in macro 'exten-vm'
      == Spawn extension (from-did-direct, 122, 2) exited non-zero on 'DAHDI/10-1'
        -- Executing [h@from-did-direct:1] Macro("DAHDI/10-1", "hangupcall,") in new stack
        -- Executing [s@macro-hangupcall:1] GotoIf("DAHDI/10-1", "1?theend") in new stack
        -- Goto (macro-hangupcall,s,3)
        -- Executing [s@macro-hangupcall:3] Hangup("DAHDI/10-1", "") in new stack
      == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'DAHDI/10-1' in macro 'hangupcall'
      == Spawn extension (from-did-direct, h, 1) exited non-zero on 'DAHDI/10-1'
    q931_hangup: other hangup
    NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Incoming Call Proceeding, peerstate Outgoing Call Proceeding, hold-state Idle
    q931.c:4845 q931_disconnect: Call 2107 enters state 11 (Disconnect Request).  Hold state: Idle

  2. #2
    Membre
    Date d'inscription
    mars 2011
    Localisation
    Genève Suisse
    Messages
    73
    Downloads
    0
    Uploads
    0
    Code:
     
    > DL-DATA request
    > Protocol Discriminator: Q.931 (8)  len=9
    > TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
    > Message Type: DISCONNECT (69)
    TEI=0 Transmitting N(S)=18, window is open V(A)=18 K=7
    
    > Protocol Discriminator: Q.931 (8)  len=9
    > TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
    > Message Type: DISCONNECT (69)
    > [08 02 81 94]
    > Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  Location: Private network serving the local user (1)
    >                  Ext: 1  Cause: Unknown (20), class = Normal Event (1) ]
        -- Hungup 'DAHDI/10-1'
    
    < Protocol Discriminator: Q.931 (8)  len=5
    < TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent from originator)
    < Message Type: RELEASE (77)
    Received message for call 0x2aaac8768ab0 on 0x1ef475b0 TEI/SAPI 0/0, call->pri is 0x1ef475b0 TEI/SAPI 0/0
    q931.c:7237 post_handle_q931_message: Call 2107 enters state 0 (Null).  Hold state: Idle
    q931_hangup: other hangup
    NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release Request, hold-state Idle
    
    > DL-DATA request
    > Protocol Discriminator: Q.931 (8)  len=9
    > TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
    > Message Type: RELEASE COMPLETE (90)
    TEI=0 Transmitting N(S)=19, window is open V(A)=19 K=7
    
    > Protocol Discriminator: Q.931 (8)  len=9
    > TEI=0 Call Ref: len= 2 (reference 2107/0x83B) (Sent to originator)
    > Message Type: RELEASE COMPLETE (90)
    > [08 02 81 90]
    > Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  Location: Private network serving the local user (1)
    >                  Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1) ]
    q931_hangup: other hangup
    NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null, hold-state Idle
    NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null, hold-state Idle

  3. #3
    Membre Association
    Date d'inscription
    septembre 2010
    Messages
    1 236
    Downloads
    0
    Uploads
    0
    et Utilise Pastebin pour les logs

Règles de messages

  • Vous ne pouvez pas créer de nouvelles discussions
  • Vous ne pouvez pas envoyer des réponses
  • Vous ne pouvez pas envoyer des pièces jointes
  • Vous ne pouvez pas modifier vos messages
  •