Affichage des résultats 1 à 3 sur 3

Discussion: Probleme avec configuration de carte sur Dahdi

Vue hybride

Message précédent Message précédent   Message suivant Message suivant
  1. #1
    Membre Junior
    Date d'inscription
    juillet 2012
    Messages
    2
    Downloads
    0
    Uploads
    0

    Probleme avec configuration de carte sur Dahdi

    Bonjour ,

    Bn je me demande akhi si vs avez déja travailler avec dahdi , j ai une carte 4 FXO , OpenVox ; et j essay de la configurer ,pui j ai trouvé que pour configurer des ports FXO , on doit les declarer comme FXS , maintenant quand je ""reload"" j ai les erreures suivantes :

    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'fxsks' (on reload) at line 1405.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'fxsks' (on reload) at line 1406.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'fxsks' (on reload) at line 1407.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'fxsks' (on reload) at line 1408.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'loadzone' (on reload) at line 1410.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'defaultzone' (on reload) at line 1411.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'signalling' (on reload) at line 14.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:12159 mkintf: Attempt to configure channel 1 with signaling Unknown signalling -1 ignored because it is already configured to be FXS Kewlstart.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:7516 handle_alarms: Detected alarm on channel 1: Red Alarm
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'signalling' (on reload) at line 25.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:12159 mkintf: Attempt to configure channel 2 with signaling Unknown signalling -1 ignored because it is already configured to be FXS Kewlstart.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:7516 handle_alarms: Detected alarm on channel 2: Red Alarm
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'signalling' (on reload) at line 36.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:12159 mkintf: Attempt to configure channel 3 with signaling Unknown signalling -1 ignored because it is already configured to be FXS Kewlstart.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:7516 handle_alarms: Detected alarm on channel 3: Red Alarm
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'signalling' (on reload) at line 45.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:12159 mkintf: Attempt to configure channel 4 with signaling Unknown signalling -1 ignored because it is already configured to be FXS Kewlstart.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:7516 handle_alarms: Detected alarm on channel 4: Red Alarm
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'userbase' (on reload) at line 23.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'vmsecret' (on reload) at line 31.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'hassip' (on reload) at line 35.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'hasiax' (on reload) at line 39.
    [Jul 31 12:08:57] WARNING[2359]: chan_dahdi.c:17282 process_dahdi: Ignoring any changes to 'hasmanager' (on reload) at line 47.


    est ce que vous puvez m'aider :(

    Merci d'avance .

  2. #2
    Membre
    Date d'inscription
    septembre 2010
    Localisation
    Lyon
    Messages
    64
    Downloads
    0
    Uploads
    0
    Salut,

    ce ne sont que des WARNING ...

    Pose l'extrait de tes chan_dahdi.conf et dahdi-channels.conf STP pour qu'on sache un peu ce que tu as configuré .

  3. #3
    Membre Junior
    Date d'inscription
    juillet 2012
    Messages
    2
    Downloads
    0
    Uploads
    0

    voici mes fichiers :

    voici mon chan-dahdi.conf
    ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
    fxsks=1
    fxsks=2
    fxsks=3
    fxsks=4
    ;Global data
    loadzone = us
    defaultzone = us

    #include dahdi-channels.conf



    là le contenu de dahdi-channels.conf :

    ;;; line="1 WCTDM/4/0 FXOKS"
    signalling=fxs_ks
    callerid="Channel 1" <4001>
    mailbox=4001
    group=5
    context=from-internal
    channel => 1
    callerid=
    mailbox=
    group=
    context=default
    ;;; line="2 WCTDM/4/1 FXOKS"
    signalling=fxs_ks
    callerid="Channel 2" <4002>
    mailbox=4002
    group=5
    context=from-internal
    channel => 2
    callerid=
    mailbox=
    group=
    context=default
    ;;; line="3 WCTDM/4/2 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 3
    callerid=
    group=
    context=default
    ;;; line="4 WCTDM/4/3 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 4
    callerid=
    group=
    context=default



    Merci à vous infiniment .

Les tags pour cette discussion

Règles de messages

  • Vous ne pouvez pas créer de nouvelles discussions
  • Vous ne pouvez pas envoyer des réponses
  • Vous ne pouvez pas envoyer des pièces jointes
  • Vous ne pouvez pas modifier vos messages
  •