Affichage des résultats 1 à 10 sur 10

Discussion: [Trixbox] Pas d'appel sortant "All circuits are busy now please try your call again later."

Mode arborescent

Message précédent Message précédent   Message suivant Message suivant
  1. 15/11/2010, 11h49 #4
    Lio
    Lio est déconnecté
    Membre Junior
    Date d'inscription
    septembre 2010
    Messages
    23
    Downloads
    1
    Uploads
    0
    J'ai donc changé mon dial pattern de ma outbound route par :

    0XXXXXXXXX
    0XXXXXXXX

    et j'ai essayé d'appeler le 0497738995. Le problème reste le même : "All circuits are busy now please try your call again later"

    Si je met un dial pattern qui me semble pas correct genre "0X" le message est différent : "You call can't be completed as dialed. Please check the number and dial again." Je pense donc que le problème ne vient pas du dial pattern.

    Code:
    == Using SIP RTP TOS bits 184

== Using SIP RTP CoS mark 5

== Using SIP VRTP TOS bits 136

== Using SIP VRTP CoS mark 6

-- Executing [[***MyName***]@from-internal:1] Macro("SIP/201-00000a6a", "user-callerid,SKIPTTL,") in new stack

-- Executing [s@macro-user-callerid:1] Set("SIP/201-00000a6a", "AMPUSER=201") in new stack

-- Executing [s@macro-user-callerid:2] GotoIf("SIP/201-00000a6a", "0?report") in new stack

-- Executing [s@macro-user-callerid:3] ExecIf("SIP/201-00000a6a", "1?Set(REALCALLERIDNUM=201)") in new stack

-- Executing [s@macro-user-callerid:4] Set("SIP/201-00000a6a", "AMPUSER=201") in new stack

-- Executing [s@macro-user-callerid:5] Set("SIP/201-00000a6a", "AMPUSERCIDNAME=[***MyName***]") in new stack

-- Executing [s@macro-user-callerid:6] GotoIf("SIP/201-00000a6a", "0?report") in new stack

-- Executing [s@macro-user-callerid:7] Set("SIP/201-00000a6a", "AMPUSERCID=201") in new stack

-- Executing [s@macro-user-callerid:8] Set("SIP/201-00000a6a", "CALLERID(all)="[***MyName***]" <201>") in new stack

-- Executing [s@macro-user-callerid:9] ExecIf("SIP/201-00000a6a", "0?Set(CHANNEL(language)=)") in new stack

-- Executing [s@macro-user-callerid:10] GotoIf("SIP/201-00000a6a", "1?continue") in new stack

-- Goto (macro-user-callerid,s,19)

-- Executing [s@macro-user-callerid:19] NoOp("SIP/201-00000a6a", "Using CallerID "[***MyName***]" <201>") in new stack

-- Executing [0497738995@from-internal:2] Set("SIP/201-00000a6a", "_NODEST=") in new stack

-- Executing [0497738995@from-internal:3] Macro("SIP/201-00000a6a", "record-enable,201,OUT,") in new stack

-- Executing [s@macro-record-enable:1] GotoIf("SIP/201-00000a6a", "1?check") in new stack

-- Goto (macro-record-enable,s,4)

-- Executing [s@macro-record-enable:4] AGI("SIP/201-00000a6a", "recordingcheck,20101115-

102530,1289813130.6894") in new stack

-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck

recordingcheck,20101115-102530,1289813130.6894: Outbound recording not enabled

-- AGI Script recordingcheck completed, returning 0

-- Executing [s@macro-record-enable:5] MacroExit("SIP/201-00000a6a", "") in new stack

-- Executing [0497738995@from-internal:4] Macro("SIP/201-00000a6a", "dialout-trunk,1,0497738995,,") in new stack

-- Executing [s@macro-dialout-trunk:1] Set("SIP/201-00000a6a", "DIAL_TRUNK=1") in new stack

-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/201-00000a6a", "0?sub-pincheck,s,1") in new stack

-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/201-00000a6a", "0?disabletrunk,1") in new stack

-- Executing [s@macro-dialout-trunk:4] Set("SIP/201-00000a6a", "DIAL_NUMBER=0497738995") in new stack

-- Executing [s@macro-dialout-trunk:5] Set("SIP/201-00000a6a", "DIAL_TRUNK_OPTIONS=tr") in new stack

-- Executing [s@macro-dialout-trunk:6] Set("SIP/201-00000a6a", "OUTBOUND_GROUP=OUT_1") in new stack

-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/201-00000a6a", "1?nomax") in new stack

-- Goto (macro-dialout-trunk,s,9)

-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/201-00000a6a", "0?skipoutcid") in new stack

-- Executing [s@macro-dialout-trunk:10] Set("SIP/201-00000a6a", "DIAL_TRUNK_OPTIONS=") in new stack

-- Executing [s@macro-dialout-trunk:11] Macro("SIP/201-00000a6a", "outbound-callerid,1") in new stack

-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/201-00000a6a", "0?Set(CALLERPRES()=)") in new stack

-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/201-00000a6a", "0?Set(REALCALLERIDNUM=201)") in new stack

-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/201-00000a6a", "1?normcid") in new stack

-- Goto (macro-outbound-callerid,s,6)

-- Executing [s@macro-outbound-callerid:6] Set("SIP/201-00000a6a", "USEROUTCID=") in new stack

-- Executing [s@macro-outbound-callerid:7] Set("SIP/201-00000a6a", "EMERGENCYCID=") in new stack

-- Executing [s@macro-outbound-callerid:8] Set("SIP/201-00000a6a", "TRUNKOUTCID=54840033") in new stack

-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/201-00000a6a", "1?trunkcid") in new stack

-- Goto (macro-outbound-callerid,s,12)

-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/201-00000a6a", "1?Set(CALLERID(all)=54840033)") in new stack

-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/201-00000a6a", "0?Set(CALLERID(all)=)") in new stack

-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/201-00000a6a", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack

-- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/201-00000a6a", "0?AGI(fixlocalprefix)") in new stack

-- Executing [s@macro-dialout-trunk:13] Set("SIP/201-00000a6a", "OUTNUM=0497738995") in new stack

-- Executing [s@macro-dialout-trunk:14] Set("SIP/201-00000a6a", "custom=SIP/028889969") in new stack

-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/201-00000a6a", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack

-- Executing [s@macro-dialout-trunk:16] Macro("SIP/201-00000a6a", "dialout-trunk-predial-hook,") in new stack

-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/201-00000a6a", "") in new stack

-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/201-00000a6a", "0?bypass,1") in new stack

-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/201-00000a6a", "0?customtrunk") in new stack

-- Executing [s@macro-dialout-trunk:19] Dial("SIP/201-00000a6a", "SIP/[***MyDID***]/0497738995,300,") in new stack

== Using SIP RTP TOS bits 184

== Using SIP RTP CoS mark 5

== Using SIP VRTP TOS bits 136

== Using SIP VRTP CoS mark 6

== Everyone is busy/congested at this time (1:0/0/1)

-- Executing [s@macro-dialout-trunk:20] Goto("SIP/201-00000a6a", "s-CHANUNAVAIL,1") in new stack

-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)

-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/201-00000a6a", "1?noreport") in new stack

-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)

-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/201-00000a6a", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 20) - failing through to other trunks") in new stack

-- Executing [0497738995@from-internal:5] Macro("SIP/201-00000a6a", "dialout-trunk,2,0497738995,,") in new stack

-- Executing [s@macro-dialout-trunk:1] Set("SIP/201-00000a6a", "DIAL_TRUNK=2") in new stack

-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/201-00000a6a", "0?sub-pincheck,s,1") in

new stack

-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/201-00000a6a", "0?disabletrunk,1") in new stack

-- Executing [s@macro-dialout-trunk:4] Set("SIP/201-00000a6a", "DIAL_NUMBER=0497738995") in new stack

-- Executing [s@macro-dialout-trunk:5] Set("SIP/201-00000a6a", "DIAL_TRUNK_OPTIONS=tr") in new stack

-- Executing [s@macro-dialout-trunk:6] Set("SIP/201-00000a6a", "OUTBOUND_GROUP=OUT_2") in new stack

-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/201-00000a6a", "1?nomax") in new stack

-- Goto (macro-dialout-trunk,s,9)

-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/201-00000a6a", "0?skipoutcid") in new stack

-- Executing [s@macro-dialout-trunk:10] Set("SIP/201-00000a6a", "DIAL_TRUNK_OPTIONS=") in new stack

-- Executing [s@macro-dialout-trunk:11] Macro("SIP/201-00000a6a", "outbound-callerid,2") in new stack

-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/201-00000a6a", "0?Set(CALLERPRES()=)") in new stack

-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/201-00000a6a", "0?Set(REALCALLERIDNUM=54840033)") in new stack

-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/201-00000a6a", "1?normcid") in new stack

-- Goto (macro-outbound-callerid,s,6)

-- Executing [s@macro-outbound-callerid:6] Set("SIP/201-00000a6a", "USEROUTCID=") in new stack

-- Executing [s@macro-outbound-callerid:7] Set("SIP/201-00000a6a", "EMERGENCYCID=") in new stack

-- Executing [s@macro-outbound-callerid:8] Set("SIP/201-00000a6a", "TRUNKOUTCID=[***MyCID***]") in new stack

-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/201-00000a6a", "1?trunkcid") in new stack

-- Goto (macro-outbound-callerid,s,12)

-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/201-00000a6a", "1?Set(CALLERID(all)=[***MyCID***]") in new stack
    Dernière modification par Lio ; 15/11/2010 à 18h10.
    Répondre avec citation Répondre avec citation
« Discussion précédente | Discussion suivante »

Règles de messages

  • Vous ne pouvez pas créer de nouvelles discussions
  • Vous ne pouvez pas envoyer des réponses
  • Vous ne pouvez pas envoyer des pièces jointes
  • Vous ne pouvez pas modifier vos messages
  •  

Règles du forum