probleme de configuration d'une carte B410P

[ndella]

Bonjour,
Aidez-moi SVP
Cdlt;

[cedricscha]

as-tu essayé un

pri intense debug span

pour voir si tu as qqch qui s'affiche ?

[ndella]

bonjour et merci pour la réponse,
la commande pri intense debug span me retourne ceci:

*CLI> pri intense debug span
4 < TEI: 107 State 4(TEI assigned)
4 < V(A)=0, V(S)=0, V(R)=0
4 < K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
4 < T200_id=0, N200=3, T203_id=0
4 < [ fe ff 03 0f 00 00 04 ff ]
4 < Unnumbered frame:
4 < SAPI: 63  C/R: 1 EA: 0
4 <  TEI: 127        EA: 1
4 <   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
4 < 5 bytes of data
4 < MDL Message: TEI Identity Check Request (4)
4 < RI: 0
4 < Ai: 127 E:1
4 Received MDL message
4 Sending TEI management message 5, TEI=107
4
4 > TEI: 107 State 4(TEI assigned)
4 > V(A)=0, V(S)=0, V(R)=0
4 > K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
4 > T200_id=0, N200=3, T203_id=0
4 > [ fc ff 03 0f 7e 8c 05 d7 ]
4 > Unnumbered frame:
4 > SAPI: 63  C/R: 0 EA: 0
4 >  TEI: 127        EA: 1
4 >   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
4 > 5 bytes of data
4 > MDL Message: TEI Identity Check Response (5)
4 > RI: 32396
4 > Ai: 107 E:1
4
4 < TEI: 107 State 4(TEI assigned)
4 < V(A)=0, V(S)=0, V(R)=0
4 < K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
4 < T200_id=0, N200=3, T203_id=0
4 < [ fe ff 03 0f 00 00 04 ff ]
4 < Unnumbered frame:
4 < SAPI: 63  C/R: 1 EA: 0
4 <  TEI: 127        EA: 1
4 <   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
4 < 5 bytes of data
4 < MDL Message: TEI Identity Check Request (4)
4 < RI: 0
4 < Ai: 127 E:1
4 Received MDL message
4 Sending TEI management message 5, TEI=107
4
4 > TEI: 107 State 4(TEI assigned)
4 > V(A)=0, V(S)=0, V(R)=0
4 > K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
4 > T200_id=0, N200=3, T203_id=0
4 > [ fc ff 03 0f 59 5e 05 d7 ]
4 > Unnumbered frame:
4 > SAPI: 63  C/R: 0 EA: 0
4 >  TEI: 127        EA: 1
4 >   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
4 > 5 bytes of data
4 > MDL Message: TEI Identity Check Response (5)
4 > RI: 22878
4 > Ai: 107 E:1
4
4 < TEI: 107 State 4(TEI assigned)
4 < V(A)=0, V(S)=0, V(R)=0
4 < K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
4 < T200_id=0, N200=3, T203_id=0
4 < [ fe ff 03 0f 00 00 04 ff ]
4 < Unnumbered frame:
4 < SAPI: 63  C/R: 1 EA: 0
4 <  TEI: 127        EA: 1
4 <   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
4 < 5 bytes of data
4 < MDL Message: TEI Identity Check Request (4)
4 < RI: 0
4 < Ai: 127 E:1
4 Received MDL message
4 Sending TEI management message 5, TEI=107
4
4 > TEI: 107 State 4(TEI assigned)
4 > V(A)=0, V(S)=0, V(R)=0
4 > K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
4 > T200_id=0, N200=3, T203_id=0
4 > [ fc ff 03 0f 2b fa 05 d7 ]
4 > Unnumbered frame:
4 > SAPI: 63  C/R: 0 EA: 0
4 >  TEI: 127        EA: 1
4 >   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
4 > 5 bytes of data
4 > MDL Message: TEI Identity Check Response (5)
4 > RI: 11258
4 > Ai: 107 E:1
4
4 < TEI: 107 State 4(TEI assigned)
4 < V(A)=0, V(S)=0, V(R)=0
4 < K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
4 < T200_id=0, N200=3, T203_id=0
4 < [ fe ff 03 0f 00 00 04 ff ]
4 < Unnumbered frame:
4 < SAPI: 63  C/R: 1 EA: 0
4 <  TEI: 127        EA: 1
4 <   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
4 < 5 bytes of data
4 < MDL Message: TEI Identity Check Request (4)
4 < RI: 0
4 < Ai: 127 E:1
4 Received MDL message
4 Sending TEI management message 5, TEI=107
4
4 > TEI: 107 State 4(TEI assigned)
4 > V(A)=0, V(S)=0, V(R)=0
4 > K=1, RC=0, l3initiated=0, reject_except=0, ack_pend=0
4 > T200_id=0, N200=3, T203_id=0
4 > [ fc ff 03 0f fb 8d 05 d7 ]
4 > Unnumbered frame:
4 > SAPI: 63  C/R: 0 EA: 0
4 >  TEI: 127        EA: 1
4 >   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
4 > 5 bytes of data
4 > MDL Message: TEI Identity Check Response (5)
4 > RI: 64397
4 > Ai: 107 E:1 

cdlt;

[Reaper]

Est ce qut tu peux arreter asterisk, télécharger cette version de libpri:

http://downloads.asterisk.org/pub/te....4.10.2.tar.gz
La compiler, refaire dahdi_cfg et démarrer asterisk, est ce que ça fonctionne ?

[ndella]

j'ai compiler la version 1.4.10.2 de libpri et ça fonctionne toujours pas d'ailleurs je n'ai plus la commande dahdi dans le cli de asterisk, alors j'ai remis l'ancienne de libpri c-à-d la version 1.4.11.5.
Cdlt;

[Reaper]

Si la commande dahdi n’était pas présente ça signifie que vous n'avez pas rechargé les paramètres de dahdi, donc finalement vous n'avez pas testé avec libpri 1.4.10, je vous invite de refaire la manip d'installation de 1.4.10 redémarrer votre machine et voir si la dahdi_cfg vous donne quelque chose avant de démarrer asterisk.

[ndella]

apres avoir compilé libpri 1.4.10.2 j'ai lancé la commande " dahdi_cfg"
[root@localhost ~]# dahdi_cfg
[root@localhost ~]#

par contre la commande " dahdi_cfg -vvv" a donné ceci:
[root@localhost ~]# dahdi_cfg -vvv
DAHDI Tools Version - 2.4.1

DAHDI Version: 2.4.1.2
Echo Canceller(s): MG2
Configuration
======================

SPAN 1: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
Channel 09: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
Channel 12: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 12)

12 channels to configure.

Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to none
Setting echocan for channel 4 to mg2
Setting echocan for channel 5 to mg2
Setting echocan for channel 6 to none
Setting echocan for channel 7 to mg2
Setting echocan for channel 8 to mg2
Setting echocan for channel 9 to none
Setting echocan for channel 10 to mg2
Setting echocan for channel 11 to mg2
Setting echocan for channel 12 to none
[root@localhost ~]#

Cdlt;