Bonjour,

Je viens de faire une fresh install d'asterisk avec une B410P.
Asterisk 1.8.22.0 + Dahdi 2.6.2 + Libpri 1.4.14

J'ai créé un truck sur Port1 de la Carte = Span1
J'ai créé 2 users ... 8100 + 8096

J'ai un dialplan avec des regles .... et je veux sortir !!!

National _0[1-5]XXXXXXXX Span 1
International _00. Span 1
Portables _0[6-7]XXXXXXXX Span 1
Num_Spec _0[8-9]XXXXXXXX Span 1
Num_Court _XNNN Span 1

== Using SIP RTP CoS mark 5
-- Executing [0618830604@DLPN_Solares:1] Macro("SIP/8100-00000003", "trunkdial-failover-0.3,DAHDI/g1/0618830604,,span_1,,0388309774") in new stack
-- Executing [s@macro-trunkdial-failover-0.3:1] GotoIf("SIP/8100-00000003", "0?1-fmsetcid,1") in new stack
-- Executing [s@macro-trunkdial-failover-0.3:2] GotoIf("SIP/8100-00000003", "1?1-setgbobname,1") in new stack
-- Goto (macro-trunkdial-failover-0.3,1-setgbobname,1)
-- Executing [1-setgbobname@macro-trunkdial-failover-0.3:1] Set("SIP/8100-00000003", "CALLERID(name)=Solares Bauen") in new stack
-- Executing [1-setgbobname@macro-trunkdial-failover-0.3:2] Goto("SIP/8100-00000003", "s,3") in new stack
-- Goto (macro-trunkdial-failover-0.3,s,3)
-- Executing [s@macro-trunkdial-failover-0.3:3] Set("SIP/8100-00000003", "CALLERID(num)=0388309774") in new stack
-- Executing [s@macro-trunkdial-failover-0.3:4] Set("SIP/8100-00000003", "CALLERID(all)=0388309774") in new stack
-- Executing [s@macro-trunkdial-failover-0.3:5] GotoIf("SIP/8100-00000003", "1?1-dial,1") in new stack
-- Goto (macro-trunkdial-failover-0.3,1-dial,1)
-- Executing [1-dial@macro-trunkdial-failover-0.3:1] Dial("SIP/8100-00000003", "DAHDI/g1/0618830604") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called DAHDI/g1/0618830604
-- Span 1: Channel 0/1 got hangup, cause 3
-- Hungup 'DAHDI/i1/0618830604-3'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [1-dial@macro-trunkdial-failover-0.3:2] GotoIf("SIP/8100-00000003", "0 > 0 ?1-CHANUNAVAIL,1:1-out,1") in new stack
-- Goto (macro-trunkdial-failover-0.3,1-out,1)
-- Executing [1-out@macro-trunkdial-failover-0.3:1] Hangup("SIP/8100-00000003", "") in new stack
== Spawn extension (macro-trunkdial-failover-0.3, 1-out, 1) exited non-zero on 'SIP/8100-00000003' in macro 'trunkdial-failover-0.3'
== Spawn extension (DLPN_Solares, 0618830604, 1) exited non-zero on 'SIP/8100-00000003'

En entrée pas de soucis, mon catchall vers un groupe est OK !!!

ipbx*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default default In Service
1 DID_span_1 fr default In Service
2 DID_span_1 fr default In Service
ipbx*CLI>

ipbx*CLI> sip show users
Username Secret Accountcode Def.Context ACL ForcerPort
8096 DLPN_Solares No Yes
8100 DLPN_Solares No Yes
ipbx*CLI>


root@ipbx: $ cat /etc/dahdi/system.conf
# Autogenerated by /usr/sbin/dahdi_genconf on Wed Jun 5 00:44:29 2013
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
span=1,1,0,ccs,ami
# termtype: te
bchan=1-2
hardhdlc=3
echocanceller=mg2,1-2

# Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" RED
span=2,2,0,ccs,ami
# termtype: te
bchan=4-5
hardhdlc=6
echocanceller=mg2,4-5

# Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" RED
span=3,3,0,ccs,ami
# termtype: te
bchan=7-8
hardhdlc=9
echocanceller=mg2,7-8

# Span 4: B4/0/4 "B4XXP (PCI) Card 0 Span 4" RED
span=4,4,0,ccs,ami
# termtype: te
bchan=10-11
hardhdlc=12
echocanceller=mg2,10-11

# Global data

loadzone = us
defaultzone = us
root@ipbx: $

J'ai l'impression que ce GUI de Digium pour asterisk fout la merde quand il parse les files ....

Donc je sors pas !!! une idée